Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill
文献类型：期刊论文
| 作者 | Zhang Xin1; Chen Shuzong1; Zhang Haoyu2; Zhang Xiwen2; Zhang Dianhua1; Sun Jie1 |
| 刊名 | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
 |
| 出版日期 | 2014 |
| 卷号 | 21期号:9页码:830-836 |
| 关键词 | THICKNESS CONTROL DYNAMIC-MODEL SYSTEMS STRIP tension control tandem cold rolling mill bilinear transformation transfer function matrix model |
| ISSN号 | 1006-706X |
| 其他题名 | Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill |
| 英文摘要 | The interstand tension control is one of the most important ways to meet tight tolerances for strip product quality during tandem cold rolling process. Using coordinate analysis and parabolic approximation for the mass flow balance principle, the strip velocities eliminating the use of forward slips and backward slips were calculated. In order to reduce the effect of roll eccentricity on the tension measurement, a filter based on bilinear transformation was designed. Applying a first-order Taylor series approximation, the transfer function matrix model of interstand tension stress was derived. The actual measurements on-site and the final calculation results showed that the established model had high calculation accuracy and was beneficial for interstand tension control of tandem cold rolling process. |
| 资助项目 | [Fundamental Research Funds for the Central Universities of China] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:5239007 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/152979]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.东北大学 2.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Zhang Xin,Chen Shuzong,Zhang Haoyu,et al. Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2014,21(9):830-836. |
| APA | Zhang Xin,Chen Shuzong,Zhang Haoyu,Zhang Xiwen,Zhang Dianhua,&Sun Jie.(2014).Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,21(9),830-836. |
| MLA | Zhang Xin,et al."Modeling and Analysis of Interstand Tension Control in 6-high Tandem Cold Rolling Mill".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 21.9(2014):830-836. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。