热门
Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension
文献类型：期刊论文
| 作者 | Zhang HuaWei3; Liu XiangHua2; Liu LiZhong1; Hu Ping1; Wu JiaLu3 |
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2015 |
| 卷号 | 28期号:9页码:1198-1204 |
| 关键词 | Tailor rolled blank (TRB) Nonuniform deformation Uniaxial tension Annealing Metallographical |
| ISSN号 | 1006-7191 |
| 其他题名 | Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension |
| 英文摘要 | The deformation characteristics of tailor rolled blank (TRB) in the course of uniaxial tension were studied by means of analysis, test and simulation. The mechanical analytical model of TRB during uniaxial tension was set up, and the deformation formulae for the thinner side and for the thicker side were derived to quantify the deformation of TRB. On this basis, uniaxial tension tests on TRB and ordinary blanks (the thinner side and the thicker side of TRB) were conducted. Lagrange polynomial interpolation method was adopted to construct the stress-strain fields of unannealed and annealed TRBs for solving TRB material parameters, and then, uniaxial tension simulation on TRB was completed. Deformations and properties of unannealed TRB were compared with those of annealed TRB, and the thinner side and the thicker side were also compared. Finally, the research results were explained by metallurgical structure. The results show that nonuniform deformation happens in TRB during uniaxial tension, and the necking occurs on the thinner side. The agreement of analysis, test and simulation confirms the correctness of the analytical model and the deformation formulae. The findings of this paper can lay the foundation for the future study on TRB stamping formability and provide a way for TRB modeling. |
| 资助项目 | [National Natural Science Foundation of China] ; [Fundamental Research Funds for the Central Universities] ; [Science and Technology Research Project for Higher School of Hebei Province] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:5543518 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/155633]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.大连大学 2.中国科学院金属研究所 3.东北大学 |
| 推荐引用方式 GB/T 7714 | Zhang HuaWei,Liu XiangHua,Liu LiZhong,et al. Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2015,28(9):1198-1204. |
| APA | Zhang HuaWei,Liu XiangHua,Liu LiZhong,Hu Ping,&Wu JiaLu.(2015).Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension.ACTA METALLURGICA SINICA-ENGLISH LETTERS,28(9),1198-1204. |
| MLA | Zhang HuaWei,et al."Study on Nonuniform Deformation of Tailor Rolled Blank During Uniaxial Tension".ACTA METALLURGICA SINICA-ENGLISH LETTERS 28.9(2015):1198-1204. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。