Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition
文献类型：期刊论文
| 作者 | Katoch Sanjeev3; Sehgal Rakesh1; Singh Vishal3 |
| 刊名 | Friction
 |
| 出版日期 | 2017 |
| 卷号 | 5期号:1页码:66-86 |
| 关键词 | cryogenics treatment hot die steel friction wear modeling Box-Cox method Mechanical engineering and machinery TJ1-1570 |
| ISSN号 | 2223-7690 |
| 其他题名 | Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition |
| 英文摘要 | Abstract Cryogenic treatment (CT) is a relatively new field, which has emerged during the last three decades of the twentieth century. However, its impact on material shaping and making tool life, and enhancement of their mechanical properties are quite remarkable. The selection of appropriate process parameters for CT is essential for cost reduction and optimum productivity. This study focuses on the influence of key parameters of CT cycles (i.e., soaking temperature and duration) on the friction and wear behavior of AISI H13 hot die steel under dry sliding conditions against hardened and tempered AISI D3 cold work tool steel (counter face) at varying sliding speeds and loads. Mathematical models have been developed for wear rate, the average coefficient of friction, and maximum contact temperature using the Box-Cox methodology. The developed mathematical models have been validated by comparing with the experimental results. Moreover, the optimum values of the process parameter have been employed to maximize the output and validate the same by confirmation of the experiments. To the best of our knowledge, this is the first study that demonstrates the modeling and optimization of sliding friction and wear characteristics of AISI H13 under varied CT cycles. |
| 资助项目 | [National Institute of Technology, Hamirpur] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:6142117 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/156032]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 1.Natl Institute Technol, Dept Mech Engn, Hamirpur 177005, HP, India 2.Institute Auto Parts & Hand Tools Technol, A-9,Phase 5, Ludhiana 141010, Punjab, India 3.中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Katoch Sanjeev,Sehgal Rakesh,Singh Vishal. Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition[J]. Friction,2017,5(1):66-86. |
| APA | Katoch Sanjeev,Sehgal Rakesh,&Singh Vishal.(2017).Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition.Friction,5(1),66-86. |
| MLA | Katoch Sanjeev,et al."Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition".Friction 5.1(2017):66-86. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。