中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion

文献类型:期刊论文

作者Yu HC5; Zhang YJ5; Sun YG5; Xie SS5; Tanaka K5
刊名ACTA METALLURGICA SINICA
出版日期2005
卷号41期号:7页码:721-726
关键词MODE-III PROPAGATION BARS fatigue crack growth stress intensity factor threshold torsion
ISSN号0412-1961
其他题名NEAR THRESHOLD FATIGUE CRACK GROWTH BEHAVIOR IN STAINLESS STEEL UNDER CYCLIC TORSION
英文摘要Near threshold fatigue crack growth tests were conducted under torsion on circumferentially pre-cracked round bars of a stainless steel. The crack growth rate was decreased with crack extension because of the sliding contact of the crack faces. The crack growth rate without the influence of crack surface contact was determined by extrapolating the relationship between the crack growth rate and the crack extension to the zero crack length. The applied stress intensity factor range is divided into two parts: one is the effective value responsible for crack growth and the other is the shielding value dissolved by crack surfaces contact. The fatigue limits for crack initiation and fracture were predicted and the predicted values agreed well with the experimental results.
语种英语
CSCD记录号CSCD:2107232
源URL[http://ir.imr.ac.cn/handle/321006/156367]  
专题金属研究所_中国科学院金属研究所
作者单位1.名古屋大学
2.Baosteel Co Ltd
3.中国科学院金属研究所
4.Benxi Iron & Steel Co Ltd
5.Institute Aeronaut Mat
推荐引用方式
GB/T 7714
Yu HC,Zhang YJ,Sun YG,et al. Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion[J]. ACTA METALLURGICA SINICA,2005,41(7):721-726.
APA Yu HC,Zhang YJ,Sun YG,Xie SS,&Tanaka K.(2005).Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion.ACTA METALLURGICA SINICA,41(7),721-726.
MLA Yu HC,et al."Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion".ACTA METALLURGICA SINICA 41.7(2005):721-726.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。