中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL

文献类型:期刊论文

作者Zhou Qianqing; Zhai Yuchun
刊名ACTA METALLURGICA SINICA
出版日期2009
卷号45期号:10页码:1249-1254
关键词STAINLESS-STEEL MICROSTRUCTURAL EVOLUTION TEMPERATURE AUSTENITE HARDNESS martensitic steel reverse austenite precipitate aging
ISSN号0412-1961
其他题名AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL
英文摘要Low carbon martensitic precipitation hardening stainless steels are widely utilized in many engineering applications due to their high strength with reasonable toughness, ductility and corrosion resistance. However, those properties and their combinations are not always satisfactory to their users. For further improvement of the mechanical properties of these types of steels, a fundamental understanding of the detailed microstructural features with various aging conditions is necessary. Therefore, the effects of aging temperature, aging time and cooling rate on the microstructure and mechanical properties of a martensitic precipitation hardening stainless steel FV520B were investigated by OM, SEM, TEM and XRD methods. The results show that the steel aged at 630 degrees C for a short time and then furnace cooled, in which a typical lath martensitic with the proper amounts of reverse austenite and fined dispersed precipitates was observed, has a, good combination of high strength and high toughness. It could be an optimized aging process for FV520B steel.
语种英语
CSCD记录号CSCD:3725739
源URL[http://ir.imr.ac.cn/handle/321006/157919]  
专题金属研究所_中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
Zhou Qianqing,Zhai Yuchun. AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL[J]. ACTA METALLURGICA SINICA,2009,45(10):1249-1254.
APA Zhou Qianqing,&Zhai Yuchun.(2009).AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL.ACTA METALLURGICA SINICA,45(10),1249-1254.
MLA Zhou Qianqing,et al."AGING PROCESS OPTIMIZATION FOR A HIGH STRENGTH AND TOUGHNESS OF FV520B MARTENSITIC STEEL".ACTA METALLURGICA SINICA 45.10(2009):1249-1254.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。