Boundary layer distributions and cooling rate of cooling sloping plate process
文献类型：期刊论文
| 作者 | Zhao Zhanyong; Guan Renguo; Wang Xiang; Huang Hongqian; Chao Runze; Dong Lei; Liu Chunming |
| 刊名 | JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
 |
| 出版日期 | 2013 |
| 卷号 | 28期号:4页码:701-705 |
| 关键词 | SEMISOLID ALUMINUM-ALLOY CASTING PROCESS semisolid grain refining sloping plate temperature boundary layer cooling rate |
| ISSN号 | 1000-2413 |
| 其他题名 | Boundary Layer Distributions and Cooling Rate of Cooling Sloping Plate Process |
| 英文摘要 | According to the principle of grain refining and slurry preparation by cooling sloping plate process, the distributions of boundary layers during melt treatment by cooling sloping plate were studied, and mathematic model of cooling rate was established. The calculation value approximately agrees with the experimental result. Laminar flow and turbulent flow exist on sloping plate surface commonly. The thickness of velocity boundary layer and the critical transfer distance from laminar flow to turbulent flow increase with the decrease of initial flow velocity. The thickness of temperature boundary layer increases with the increment of flow distance and the decrease of initial flow velocity. The melt cooling rate and melt thickness have an inverse proportion relationship. The melt cooling rate increases along the plate direction gradually when the initial flow velocity is lower than 1 m/s, the melt cooling rate keeps nearly a constant when the initial flow velocity is 1 m/s, when the initial flow velocity is higher than 1 m/s, the melt cooling rate decreases gradually. The melt cooling rate of cooling sloping plate process can reach 10(2)-10(3) K/s and belongs to meta-rapid solidification scope. |
| 资助项目 | [National Natural Science Foundation for Outstanding Young Scholars of China] ; [National Natural Science Foundation of China] ; [Fok Ying Tong Education Foundation] ; [Basic Scientific Research Operation of Center University] ; [Chinese National Program for Fundamental Research and Development] |
| 语种 | 英语 |
| CSCD记录号 | CSCD:5077984 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/157979]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 作者单位 | 中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Zhao Zhanyong,Guan Renguo,Wang Xiang,et al. Boundary layer distributions and cooling rate of cooling sloping plate process[J]. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,2013,28(4):701-705. |
| APA | Zhao Zhanyong.,Guan Renguo.,Wang Xiang.,Huang Hongqian.,Chao Runze.,...&Liu Chunming.(2013).Boundary layer distributions and cooling rate of cooling sloping plate process.JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION,28(4),701-705. |
| MLA | Zhao Zhanyong,et al."Boundary layer distributions and cooling rate of cooling sloping plate process".JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION 28.4(2013):701-705. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。