中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process

文献类型:期刊论文

作者Guan Renguo; Zhao Zhanyong; Huang Hongqian; Zhang Qiusheng; Liu Chunming
刊名ACTA METALLURGICA SINICA-ENGLISH LETTERS
出版日期2012
卷号25期号:1页码:81-88
关键词ALUMINUM-ALLOY AL Sloping plate Rheo-casting Mathematic model Solid fraction Parameter
ISSN号1006-7191
其他题名Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process
英文摘要A mathematic model of the solid fraction during rheo-casting by the cooling sloping plate process was established, and the effects of the process parameters on the solid fraction were analyzed. The calculation results show that the experimental result is approximately agreed with the calculation value. The effect of the casting temperature on the change rate of the solid fraction is not obvious. But the beginning solidification length is greatly influenced by the casting temperature. The beginning solidification length increases with the increment of the casting temperature. The effect of the sloping angle on the solid fraction becomes obvious with the increment of the sloping plate length. The solid fraction increases sharply with the decrease of the initial thickness of the melt. The melt initial thickness between 15 and 20 mm is suggested.
资助项目[National Natural Science Foundation of China] ; [National Program for Fundamental Research and Development of China]
语种英语
CSCD记录号CSCD:4464229
源URL[http://ir.imr.ac.cn/handle/321006/158210]  
专题金属研究所_中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
Guan Renguo,Zhao Zhanyong,Huang Hongqian,et al. Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2012,25(1):81-88.
APA Guan Renguo,Zhao Zhanyong,Huang Hongqian,Zhang Qiusheng,&Liu Chunming.(2012).Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process.ACTA METALLURGICA SINICA-ENGLISH LETTERS,25(1),81-88.
MLA Guan Renguo,et al."Mathematic model of solid fraction during rheo-casting by the cooling sloping plate process".ACTA METALLURGICA SINICA-ENGLISH LETTERS 25.1(2012):81-88.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。