中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Microstructure and Mechanical Properties of an Austenitic Heat-Resistant Steel after Service at 570 degrees C and 25.4 MPa for 18 Years

文献类型:期刊论文

作者Yang, Xu2; Yu, Chengwei3; Yang, Xisheng2; Yan, Kai2; Qian, Gong2; Wang, Baochen1; Yan, Wei4; Shi, Xianbo4
刊名JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
出版日期2021-01-05
页码9
关键词12Cr18Ni12Ti austenitic stainless steel long-term service mechanical properties microstructure
ISSN号1059-9495
DOI10.1007/s11665-020-05420-6
通讯作者Yang, Xu(592782553@qq.com)
英文摘要Microstructure and mechanical properties of an austenitic heat-resistant steel (12Cr18Ni12Ti) serviced in a supercritical power plant at 570 degrees C/25.4 MPa for 160,000 h were investigated. The results show that the hardness and the tensile strength did not decrease; however, the impact toughness was remarkably reduced. The TiC precipitate shows excellent thermostability; for example, it hardly grew up, and no big M23C6 carbides were found. However, large Fe, Cr-rich sigma-phase was doomed to precipitate along grain boundary, which should be responsible for the reduced toughness. The growth of sigma-phase was observed to have an interaction with the preexisted carbides.
WOS研究方向Materials Science
语种英语
WOS记录号WOS:000605155400042
出版者SPRINGER
源URL[http://ir.imr.ac.cn/handle/321006/158884]  
专题金属研究所_中国科学院金属研究所
通讯作者Yang, Xu
作者单位1.Guohua Elect Power Branch China Shenhua Energy Co, Beijing 100025, Peoples R China
2.China Special Equipment Inspect & Res Inst, Beijing 100029, Peoples R China
3.Tianjin Guohua Panshan Power Generat Co Ltd, Tianjin 301900, Peoples R China
4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式
GB/T 7714
Yang, Xu,Yu, Chengwei,Yang, Xisheng,et al. Microstructure and Mechanical Properties of an Austenitic Heat-Resistant Steel after Service at 570 degrees C and 25.4 MPa for 18 Years[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2021:9.
APA Yang, Xu.,Yu, Chengwei.,Yang, Xisheng.,Yan, Kai.,Qian, Gong.,...&Shi, Xianbo.(2021).Microstructure and Mechanical Properties of an Austenitic Heat-Resistant Steel after Service at 570 degrees C and 25.4 MPa for 18 Years.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,9.
MLA Yang, Xu,et al."Microstructure and Mechanical Properties of an Austenitic Heat-Resistant Steel after Service at 570 degrees C and 25.4 MPa for 18 Years".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021):9.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。