中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel

文献类型:期刊论文

作者Tian, Jia-long2; Hu, Guang1,4; Wang, Wei1; Shan, Yi-yin1; Jiang, Zhou-hua2,3
刊名JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
出版日期2021-01-04
页码7
关键词Gradient material Torsional deformation Thermodynamic calculation 304 stainless steel Martensitic transformation
ISSN号1006-706X
DOI10.1007/s42243-020-00526-6
通讯作者Wang, Wei(wangw@imr.ac.cn) ; Jiang, Zhou-hua(jiangzh@smm.neu.edu.cn)
英文摘要After applying torsion to cylindrical 304 stainless steel samples, a gradient structure along the radial direction was obtained. It was found that the volume fraction of alpha '-martensite increased gradually from the center to the surface of samples. The possibility of deformation-induced martensitic transformation was analyzed theoretically, whose conclusions were consistent with the experimental results. It was found that torsional deformation could produce abundant deformation twin and deformation-induced martensite, which could affect the tensile property of steel distinctly. The existence of deformation and martensite during torsion could increase the strength but deteriorate the ductility dramatically during the tensile test, which should be attributed to the weakening of work hardening ability. As a result of severe deformation, both strain-induced and stress-induced martensite have been observed. Also, two types of martensitic transformation mechanisms during torsional deformation were discussed.
资助项目National Natural Science Foundation of China[51472249] ; Youth Innovation Promotion Association of CAS[2017233] ; Fundamental Research Funds for the Central Universities[N2024005-4]
WOS研究方向Metallurgy & Metallurgical Engineering
语种英语
WOS记录号WOS:000604801600003
出版者SPRINGER
资助机构National Natural Science Foundation of China ; Youth Innovation Promotion Association of CAS ; Fundamental Research Funds for the Central Universities
源URL[http://ir.imr.ac.cn/handle/321006/158930]  
专题金属研究所_中国科学院金属研究所
通讯作者Wang, Wei; Jiang, Zhou-hua
作者单位1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China
2.Northeastern Univ, Sch Met, Shenyang 110819, Liaoning, Peoples R China
3.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Liaoning, Peoples R China
4.Shenyang RongRong Sci & Technol Co Ltd, Shenyang 110000, Liaoning, Peoples R China
推荐引用方式
GB/T 7714
Tian, Jia-long,Hu, Guang,Wang, Wei,et al. Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2021:7.
APA Tian, Jia-long,Hu, Guang,Wang, Wei,Shan, Yi-yin,&Jiang, Zhou-hua.(2021).Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,7.
MLA Tian, Jia-long,et al."Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021):7.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。