Evaluation of elastoplastic properties of brittle sandstone at microscale using micro-indentation test and simulation
文献类型:期刊论文
作者 | Song, Rui1,3; Wang, Yao2; Sun, Shuyu3; Cui, Mengmeng2; Liu, Jianjun1 |
刊名 | ENERGY SCIENCE & ENGINEERING |
出版日期 | 2020-06-05 |
页码 | 12 |
ISSN号 | 2050-0505 |
关键词 | dimensionless analysis initial strength micro-CT micro-indentation residual strength |
DOI | 10.1002/ese3.759 |
英文摘要 | The micro-indentation test has been regarded as an efficient tool to obtain the elasticity modulus and hardness of the minerals in rock, which is essential for studying the deformation-crack mechanism of the pore structure. However, researches on microscopic plastic parameters have been rarely conducted. This paper develops a novel method to determine the microscopic initial strength and residual strength of brittle sandstone. A dimensionless analysis on the micro-indentation curve of rock is conducted to acquire its key influencing factors of the elastoplastic properties, which include the initial cohesive force and the residual cohesive force. Then, small cylindrical rock samples are prepared for micro-CT scanning and micro-indentation test by a conical indenter to acquire the microstructure, indentation curve, and the microscale elasticity. The pore scale indentation simulation is conducted using the reconstructed rock models with different strength. The function between the indentation curve and strength is deduced by the parametric finite element method (FEM) study. Based on this function, the microscale initial strength and residual strength of the brittle sandstone are determined. The proposed method is validated by comparing the microscale numerical simulation results of uniaxial compression on the representative volume element (RVE) model of rock with the experimental results. A reasonable deviation is observed compared with the experimental benchmark data for the stress-strain curves, as well as Young's modulus and uniaxial compression strength, proving the effectiveness of the proposed method. |
资助项目 | King Abdullah University of Science and Technology (KAUST)[BAS/1/1351-01] ; National Natural Science Foundation of China[51909225] ; National Natural Science Foundation of China[51874262] ; State Key Laboratory of Geomechanics and Geotechnical Engineering[Z017009] ; National Science and Technology Major Project of China[2017ZX05013001-002] ; China Scholarship Council |
WOS研究方向 | Energy & Fuels |
语种 | 英语 |
出版者 | WILEY |
WOS记录号 | WOS:000537859300001 |
源URL | [http://119.78.100.198/handle/2S6PX9GI/24274] |
专题 | 中科院武汉岩土力学所 |
通讯作者 | Sun, Shuyu; Cui, Mengmeng |
作者单位 | 1.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan, Peoples R China 2.Southwest Petr Univ, Chengdu 610500, Peoples R China 3.King Abdullah Univ Sci & Technol KAUST, Computat Transport Phenomena Lab CTPL, Thuwal 239556900, Saudi Arabia |
推荐引用方式 GB/T 7714 | Song, Rui,Wang, Yao,Sun, Shuyu,et al. Evaluation of elastoplastic properties of brittle sandstone at microscale using micro-indentation test and simulation[J]. ENERGY SCIENCE & ENGINEERING,2020:12. |
APA | Song, Rui,Wang, Yao,Sun, Shuyu,Cui, Mengmeng,&Liu, Jianjun.(2020).Evaluation of elastoplastic properties of brittle sandstone at microscale using micro-indentation test and simulation.ENERGY SCIENCE & ENGINEERING,12. |
MLA | Song, Rui,et al."Evaluation of elastoplastic properties of brittle sandstone at microscale using micro-indentation test and simulation".ENERGY SCIENCE & ENGINEERING (2020):12. |
入库方式: OAI收割
来源:武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。