Analysis and design of the induction coil for a 2.1 m / 120 mT magnetic field qualification test facility
文献类型：期刊论文
| 作者 | Lu, Yiwei1; Yang, Yong1; Jiang, Li2 ; Zhang, Ming1; Wang, Rumeng1; Qin, Bin1
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2021-05-01 |
| 卷号 | 166 |
| 关键词 | Tokamak Induction coil Magnetic field qualification test Field homogeneity analysis Finite element analysis |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2021.112302 |
| 通讯作者 | Jiang, Li(jiangli@ipp.ac.cn) |
| 英文摘要 | Equipment mounted around tokamak devices are usually exposed to high intensity magnetic field and suffers from severe interference problems. To qualify the operation reliability of sensitive devices under strong magnetic field environment, a magnetic field qualification test facility was designed and built in Chinese Academy of Sciences, Institute of Plasma Physics (ASIPP). This paper presents the analysis and design of the induction coil for this test facility. At first, a field homogeneity analysis is performed and an optimized three-coil configuration with minimum power loss and conductor mass is obtained. Then, the electrical, structural and cooling designs are conducted and verified by finite element analysis. At last, error field analysis is performed to evaluate the influence of installation misalignment. The designed induction coil is capable of generating a homogeneous magnetic field with a field inhomogeneity of 1.2 in a 2.1 m side-length cubic zone. The test facility enables the qualification test for the devices with a maximum dimension within 2.1 m and at a highest nominal test level of 120 m T. Further, the optimization design method can be extended to the design of some other fusion auxiliary devices. |
| 资助项目 | Comprehensive Research Facility for Fusion Technology Program of China[2018-00005273-01-001228] ; National Natural Science Foundation of China[51821005] |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000640896500007 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | Comprehensive Research Facility for Fusion Technology Program of China ; National Natural Science Foundation of China |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/122479]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Jiang, Li |
| 作者单位 | 1.Huazhong Univ Sci & Technol, Sch Elect & Elect Engn, Int Joint Res Lab Magnet Confinement Fus & Plasma, State Key Lab Adv Electromagnet Engn & Technol, Wuhan 430074, Peoples R China 2.Chinese Acad Sci, Inst Plasma Phys, Hefei 230031, Anhui, Peoples R China |
| 推荐引用方式 GB/T 7714 | Lu, Yiwei,Yang, Yong,Jiang, Li,et al. Analysis and design of the induction coil for a 2.1 m / 120 mT magnetic field qualification test facility[J]. FUSION ENGINEERING AND DESIGN,2021,166. |
| APA | Lu, Yiwei,Yang, Yong,Jiang, Li,Zhang, Ming,Wang, Rumeng,&Qin, Bin.(2021).Analysis and design of the induction coil for a 2.1 m / 120 mT magnetic field qualification test facility.FUSION ENGINEERING AND DESIGN,166. |
| MLA | Lu, Yiwei,et al."Analysis and design of the induction coil for a 2.1 m / 120 mT magnetic field qualification test facility".FUSION ENGINEERING AND DESIGN 166(2021). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。