Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate
文献类型：期刊论文
| 作者 | Lei, Q; Huang, HF; Han, FF; Lei, GH; Li, C; Zhou, XT |
| 刊名 | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
 |
| 出版日期 | 2020 |
| 卷号 | 29期号:6页码:3974-3982 |
| 关键词 | MOLTEN-SALT REACTOR HIGH-TEMPERATURE MICROSTRUCTURE EVOLUTION CORROSION TENSILE SUPERALLOY MSR |
| ISSN号 | 1059-9495 |
| DOI | 10.1007/s11665-020-04885-9 |
| 文献子类 | 期刊论文 |
| 英文摘要 | Molten salt reactors (MSRs), which represent a widely implemented reactor type, are subject to severe conditions, which significantly impact structural materials. Hence, in this study, the bimetal composite plate (Inconel 617/Ni-201) was developed by hot rolling to meet the demands of alloy structural materials employed in future high-temperature MSRs. The results of the bending test indicate that the interface of the two metals was well bonded. The tensile properties and microstructure, especially at the bimetallic interface of the composite plate, were tested and characterized using tensile testing machine, transmission electron microscopy (TEM), and scanning electron microscopy. TEM analysis of the bimetal interface confirmed that the two materials were in a metallurgical bonding state. Moreover, the tensile properties of the bimetal composite plate were mainly determined by the Inconel 617. In addition to the elongation at room temperature, the tensile properties of the composite plate were superior to those of Hastelloy N alloy, which is a well-known and potential structural material for use in MSRs. In this study, the tensile properties of the composite plate after long-term high-temperature aging were also tested to determine its applicability to future high-temperature MSRs. |
| 语种 | 英语 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/32786]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 作者单位 | 1.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Shanghai Inst Appl Phys, Shanghai 201800, Peoples R China |
| 推荐引用方式 GB/T 7714 | Lei, Q,Huang, HF,Han, FF,et al. Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2020,29(6):3974-3982. |
| APA | Lei, Q,Huang, HF,Han, FF,Lei, GH,Li, C,&Zhou, XT.(2020).Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,29(6),3974-3982. |
| MLA | Lei, Q,et al."Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 29.6(2020):3974-3982. |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。