Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography
文献类型：期刊论文
| 作者 | Chai, HW; Xie, ZL; Xiao, XH; Xie, HL; Huang, JY; Luo, SN |
| 刊名 | INTERNATIONAL JOURNAL OF PLASTICITY
 |
| 出版日期 | 2020 |
| 卷号 | 131页码:- |
| 关键词 | COMPRESSIVE BEHAVIOR ALUMINUM FOAM STRAIN-RATE LOCALIZATION DAMAGE SHEAR MECHANISMS COMPOSITE POROSITY SOLIDS |
| ISSN号 | 0749-6419 |
| DOI | 10.1016/j.ijplas.2020.102730 |
| 文献子类 | 期刊论文 |
| 英文摘要 | Polymethacrylimide (PMI) foams own the highest specific stiffness and strength of all foams. In situ x-ray micro computed tomography (CT) is used to map three-dimensional (3D) microstructures of this representative closed-cell foam under quasi-static compression. The strain fields obtained via digital volume correlation reveal divergent types (discrete or spreading) of deformation banding for the PMI foam with different densities (52 or 75 kg m(-3)). Significant cell collapse occurs in the deformation bands, leading to similar to 40% reduction of the mean cell size, and alignment of cell orientations. Microstructure-based finite element analysis confirms that elastic buckling of cell walls dominates cell collapse, and the buckling strength of walls depends highly on their thicknesses and inclination angles. An edge segmentation technique is then used to quantify the morphology and buckling strength index of cell walls. The spatial distribution of the weakest 3% cell walls correlates well with the modes of deformation banding. Based on elastic buckling of cell walls, new analytical models are developed to predict the strength-density scaling law and stress-strain curves of the PMI foam, which agree well with the experimental results. |
| 语种 | 英语 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/33006]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 作者单位 | 1.Argonne Natl Lab, Adv Photon Source, Argonne, IL 60439 USA 2.Chinese Acad Sci, Shanghai Inst Appl Phys, Shanghai 201204, Peoples R China 3.Peac Inst Multiscale Sci, Chengdu 610031, Sichuan, Peoples R China 4.Southwest Jiaotong Univ, Key Lab Adv Technol Mat, Minist Educ, Chengdu 610031, Sichuan, Peoples R China 5.Southwest Jiaotong Univ, Inst Mat Dynam, Chengdu 610031, Sichuan, Peoples R China |
| 推荐引用方式 GB/T 7714 | Chai, HW,Xie, ZL,Xiao, XH,et al. Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography[J]. INTERNATIONAL JOURNAL OF PLASTICITY,2020,131:-. |
| APA | Chai, HW,Xie, ZL,Xiao, XH,Xie, HL,Huang, JY,&Luo, SN.(2020).Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography.INTERNATIONAL JOURNAL OF PLASTICITY,131,-. |
| MLA | Chai, HW,et al."Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography".INTERNATIONAL JOURNAL OF PLASTICITY 131(2020):-. |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。