Very high cycle fatigue (VHCF) response of additively manufactured materials: A review
文献类型：期刊论文
| 作者 | Caivano, Riccardo3; Tridello, Andrea3; Chiandussi, Giorgio3; Qian GA(钱桂安)2 ; Paolino, Davide3; Berto, Filippo1
|
| 刊名 | FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
 |
| 出版日期 | 2021-09-06 |
| 页码 | 25 |
| ISSN号 | 8756-758X |
| 关键词 | additive manufacturing (AM) aluminum alloy In718 Ti6Al4V very high cycle fatigue (VHCF) |
| DOI | 10.1111/ffe.13567 |
| 通讯作者 | Caivano, Riccardo(riccardo.caivano@polito.it) |
| 英文摘要 | Recently, the diffusion of components produced through additive manufacturing (AM) processes has significantly increased. Concurrently, to ensure the safe employment of AM components, the research has focused on the assessment of their fatigue response. In the present paper, a comprehensive literature review on the very high cycle fatigue (VHCF) response of materials produced through AM processes is provided. The experimental results on the VHCF response of Ti6Al4V, AlSi10Mg, AlSi7Mg, AlSi12, IN718, and 316L specimens produced through different AM processes are summarized. The main factors affecting the VHCF response of AM materials are finally compared and critically analyzed. |
| 分类号 | 二类 |
| WOS关键词 | SLM ALSI10MG SPECIMENS ; MECHANICAL-PROPERTIES ; FAILURE MECHANISMS ; BEHAVIOR ; TECHNOLOGY ; ALLOY ; LIFE ; SUPERALLOY ; TI-6AL-4V ; TI6A14V |
| 资助项目 | Politecnico di Torino within the CRUI-CARE Agreement |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000693817700001 |
| 资助机构 | Politecnico di Torino within the CRUI-CARE Agreement |
| 其他责任者 | Caivano, Riccardo |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/87414]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 作者单位 | 1.Norwegian Univ Sci & Technol NTNU, Dept Mech & Ind Engn, Trondheim, Norway 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech LNM, Beijing, Peoples R China; 3.Politecn Torino, Dept Mech & Aerosp Engn, I-10129 Turin, Italy; |
| 推荐引用方式 GB/T 7714 | Caivano, Riccardo,Tridello, Andrea,Chiandussi, Giorgio,et al. Very high cycle fatigue (VHCF) response of additively manufactured materials: A review[J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES,2021:25. |
| APA | Caivano, Riccardo,Tridello, Andrea,Chiandussi, Giorgio,钱桂安,Paolino, Davide,&Berto, Filippo.(2021).Very high cycle fatigue (VHCF) response of additively manufactured materials: A review.FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES,25. |
| MLA | Caivano, Riccardo,et al."Very high cycle fatigue (VHCF) response of additively manufactured materials: A review".FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021):25. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。