Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments
文献类型:期刊论文
作者 | Hong, Jing4; Qian, Yongfeng4; Zhang, Lin3; Huang, Hu4; Jiang MQ(蒋敏强)1,2; Yan, Jiwang3 |
刊名 | SURFACE & COATINGS TECHNOLOGY |
出版日期 | 2021-10-25 |
卷号 | 424页码:11 |
ISSN号 | 0257-8972 |
关键词 | Laser nitriding Metallic glass Orthogonal experiment Surface hardness |
DOI | 10.1016/j.surfcoat.2021.127657 |
通讯作者 | Huang, Hu(huanghu@jlu.edu.cn) |
英文摘要 | Laser nitriding is a useful method to improve the surface hardness of materials, and it has been newly introduced to harden the surface of Zr-based metallic glass (MG). However, the currently achieved improvement in surface hardness is only 15.7%. To explore the potential of laser nitriding of Zr-based MG, orthogonal experiments were designed and performed in this study. By nanosecond pulsed laser irradiation in nitrogen atmosphere, the effects of laser parameters (average laser power, scanning speed, overlap rate and number of irradiation cycle) on the surface hardness of Zr-based MG were systematically investigated. The experimental results showed the highest surface hardness reached 18.21 GPa (Meyers hardness) by orthogonal design, which is about 2 times higher than that of the as-cast MG. Furthermore, the laser affecting layer consisting of nitride phase reached tens of microns. The obtained results demonstrated that significant improvement in surface hardness could be achieved by selecting appropriate laser irradiation parameters, which would be beneficial to the engineering applications of MGs as surface contact materials. |
分类号 | 二类/Q1 |
WOS关键词 | MECHANICAL-PROPERTIES ; HARDNESS ; SHOCK ; TOUGHNESS ; TITANIUM ; NITROGEN ; BEHAVIOR ; LOAD |
资助项目 | National Natural Science Foundation of China[51705197] ; Graduate Innovation Fund of Jilin University[101832020CX106] ; Fundamental Res earch Funds for the Central Universities[2019-2021] |
WOS研究方向 | Materials Science ; Physics |
语种 | 英语 |
WOS记录号 | WOS:000697567600027 |
资助机构 | National Natural Science Foundation of China ; Graduate Innovation Fund of Jilin University ; Fundamental Res earch Funds for the Central Universities |
其他责任者 | Huang, Hu |
源URL | [http://dspace.imech.ac.cn/handle/311007/87462] |
专题 | 力学研究所_非线性力学国家重点实验室 |
作者单位 | 1.Univ Chinese Acad Sci, Sch Engn Sci, Beijing 100049, Peoples R China 2.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China; 3.Keio Univ, Fac Sci & Technol, Dept Mech Engn, Yokohama, Kanagawa 2238522, Japan; 4.Jilin Univ, Electron Microscopy Ctr, Sch Mech & Aerosp Engn, Key Lab CNC Equipment Reliabil, Changchun 130022, Jilin, Peoples R China; |
推荐引用方式 GB/T 7714 | Hong, Jing,Qian, Yongfeng,Zhang, Lin,et al. Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments[J]. SURFACE & COATINGS TECHNOLOGY,2021,424:11. |
APA | Hong, Jing,Qian, Yongfeng,Zhang, Lin,Huang, Hu,蒋敏强,&Yan, Jiwang.(2021).Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments.SURFACE & COATINGS TECHNOLOGY,424,11. |
MLA | Hong, Jing,et al."Laser nitriding of Zr-based metallic glass: An investigation by orthogonal experiments".SURFACE & COATINGS TECHNOLOGY 424(2021):11. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。