FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N
文献类型：期刊论文
| 作者 | Qiao, Y-X1; Sheng, S-L1; Zhang, L-M2; Chen, J.1; Yang, L-L1; Zhou, H-L1; Wang, Y-X1; Li, H-B3; Zheng, Z-B4 |
| 刊名 | JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY
 |
| 出版日期 | 2021 |
| 卷号 | 57期号:2页码:285-293 |
| ISSN号 | 1450-5339 |
| 关键词 | High nitrogen austenite stainless steel Wear Work hardening Friction coefficient |
| DOI | 10.2298/JMMB201026025Q |
| 通讯作者 | Qiao, Y-X(yxqiao@just.edu.cn) |
| 英文摘要 | The friction and wear behaviors of a Fe-19Cr-15Mn-0.66N high nitrogen austenitic stainless steel (HNSS) were investigated. Tribological investigations were carried out under different applied loads of 5 N, 10 N, 15 N, and 20 N. Scanning electron microscope (SEM) and laser scanning confocal microscope (LSCM) were used to understand the wear mechanisms under different loads and the reasons for the improved wear resistance. The lower friction coefficient and improved wear resistance were observed with the increase in applied loads. Under a higher load, the friction enhanced the work hardening ability of HNSS, which in turn improved its surface hardness and thus the increased wear resistance of HNSS. |
| 资助项目 | National Natural Science Foundation of China[51905110] ; National Natural Science Foundation of China[51401092] ; Science and Technology Planning Project of Guangzhou[201906040007] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | TECHNICAL FACULTY, BOR-SERBIA |
| WOS记录号 | WOS:000672591100015 |
| 资助机构 | National Natural Science Foundation of China ; Science and Technology Planning Project of Guangzhou |
| 源URL | [http://ir.imr.ac.cn/handle/321006/160056]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Qiao, Y-X |
| 作者单位 | 1.Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang, Jiangsu, Peoples R China 2.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang, Peoples R China 3.Northeastern Univ, Sch Met, Shenyang, Peoples R China 4.Guangdong Inst Mat & Proc, Guangdong Key Lab Met Toughening Technol & Applic, Guangzhou, Peoples R China |
| 推荐引用方式 GB/T 7714 | Qiao, Y-X,Sheng, S-L,Zhang, L-M,et al. FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N[J]. JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY,2021,57(2):285-293. |
| APA | Qiao, Y-X.,Sheng, S-L.,Zhang, L-M.,Chen, J..,Yang, L-L.,...&Zheng, Z-B.(2021).FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N.JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY,57(2),285-293. |
| MLA | Qiao, Y-X,et al."FRICTION AND WEAR BEHAVIORS OF A HIGH NITROGEN AUSTENITIC STAINLESS STEEL Fe-19Cr-15Mn-0.66N".JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY 57.2(2021):285-293. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。