Interfacial characteristics and residual welding stress distribution of K4750 and Hastelloy X dissimilar superalloys joints
文献类型：期刊论文
| 作者 | Xie, Jilin1,2; Ma, Yingche2; Wang, Min2; Li, Haoze2; Fang, Naiwen3; Liu, Kui2 |
| 刊名 | JOURNAL OF MANUFACTURING PROCESSES
 |
| 出版日期 | 2021-07-01 |
| 卷号 | 67页码:253-261 |
| ISSN号 | 1526-6125 |
| 关键词 | Interfacial microstructures Residual welding stress Dissimilar joints Ni based superalloys |
| DOI | 10.1016/j.jmapro.2021.05.001 |
| 通讯作者 | Ma, Yingche(ycma@imr.ac.cn) ; Liu, Kui(kliu@imr.ac.cn) |
| 英文摘要 | Gas tungsten arc welding (GTAW) method was employed to join a newly developed cast superalloy K4750 with Hastelloy X by using K4750 and Hastelloy X filler metals (FMs), respectively. Thereby we obtained two kinds of interfaces namely K4750 base metal (BM) and Hastelloy X FM, and K4750 FM and Hastelloy X BM. The elemental distribution, interfacial characteristics, and the residual welding stress of the dissimilar joints were investigated by electron probe micro analyzer (EPMA), electron backscattered diffraction (EBSD), and section technique, respectively. The results showed that the elemental distribution across both interfaces were varied significantly. And the composition segregation regions were identified in both interfaces but the segregation extent was different. Epitaxial growth was clearly observed in both interfaces. The distribution of the residual welding stress across the joint exhibited that the highest tension stress area in both as-welded joints was located at the joint heat affected zone (HAZ). The residual welding stress in the joint with Hastelloy X FM was significantly relieved through post weld heat treatment (PWHT). |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCI LTD |
| WOS记录号 | WOS:000658510500002 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/160415]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Ma, Yingche; Liu, Kui |
| 作者单位 | 1.Nanchang Hangkong Univ, Jiangxi Key Lab Forming & Joining Technol Aerosp, Nanchang 330063, Jiangxi, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.Harbin Welding Inst Ltd Co, Harbin 150028, Peoples R China |
| 推荐引用方式 GB/T 7714 | Xie, Jilin,Ma, Yingche,Wang, Min,et al. Interfacial characteristics and residual welding stress distribution of K4750 and Hastelloy X dissimilar superalloys joints[J]. JOURNAL OF MANUFACTURING PROCESSES,2021,67:253-261. |
| APA | Xie, Jilin,Ma, Yingche,Wang, Min,Li, Haoze,Fang, Naiwen,&Liu, Kui.(2021).Interfacial characteristics and residual welding stress distribution of K4750 and Hastelloy X dissimilar superalloys joints.JOURNAL OF MANUFACTURING PROCESSES,67,253-261. |
| MLA | Xie, Jilin,et al."Interfacial characteristics and residual welding stress distribution of K4750 and Hastelloy X dissimilar superalloys joints".JOURNAL OF MANUFACTURING PROCESSES 67(2021):253-261. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。