A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg
文献类型：期刊论文
| 作者 | Zhao, Dongqing2; Li, Guanyu2; Li, Peiliang2; Zhou, Jixue2; Cheng, Kaiming2; Liu, Yunteng2; Yang, Yuansheng2,3; Duan, Junpeng1; Ghomashchi, Reza4; Wang, Xitao2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2021-01-28 |
| 卷号 | 803页码:9 |
| ISSN号 | 0921-5093 |
| 关键词 | Magnesium Particle-stimulated nucleation Grain refinement Microstructure Mechanical property |
| DOI | 10.1016/j.msea.2020.140508 |
| 通讯作者 | Zhao, Dongqing(zhaodq@sdas.org) ; Zhou, Jixue(zhoujx@sdas.org) |
| 英文摘要 | A comparative study on the microstructures and mechanical properties of the extruded Mg-xCa/Mn/Ce (x = 0.25, 0.5, 1, 2.0 wt%) alloys and pure Mg has been carried out. It was found that when the addition of Ca, Mn and Ce was more than 0.25 wt%, 0.5 wt% and 0.5 wt% respectively, microstructures with fine grain sizes smaller than 5 mu m can be achieved by extruding at 375 degrees C with a extrusion ratio of 30 and a ram speed of 0.8 mm/s. While the grain size of pure magnesium extruded under the same condition was 26.6 mu m. The addition of Ca, Mn or Ce has significant effects on the textures of the extruded Mg-xCa/Mn/Ce alloys. The maximum intensity peaks in PF and IPF of Mg are all deviated by a certain degree with the addition of Ca, Mn or Ce. In the 12 extrusion alloys, Mg-0.5Ca/Mg-2Mn and Mg-1Ce exhibited better mechanical properties, whose ultimate tensile strength and elongation are 243.6 MPa, 233.7 MPa, 321.5 MPa and 25.6%, 20.7%, 7.6%. While the ultimate tensile strength and elongation of as-extruded pure Mg is 173.8 MPa and 16.0% respectively. Mg-xCa and Mg-0.25Ce alloys with weak texture showed weaker tension-compression asymmetry. The experimental results showed that it is feasible to prepare fine grained (<5 mu m) Mg-xCa/Mn/Ce alloys with much improved mechanical properties using conventional extrusion. |
| 资助项目 | National Key Research and Development Plan[2017YFB0103904] ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities[2020KJA002] ; Program of Promoting Collaborative Innovation and Industrialization of Achievements of Jinan Municipal Universities and Research Institutes[2019GXRC030] ; Natural Science Foundation of Shandong Province[ZR2019PEM008] ; Shandong Province Key Research and Development Plan[2019JZZY020329] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | ELSEVIER SCIENCE SA |
| WOS记录号 | WOS:000612662300002 |
| 资助机构 | National Key Research and Development Plan ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities ; Program of Promoting Collaborative Innovation and Industrialization of Achievements of Jinan Municipal Universities and Research Institutes ; Natural Science Foundation of Shandong Province ; Shandong Province Key Research and Development Plan |
| 源URL | [http://ir.imr.ac.cn/handle/321006/160422]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhao, Dongqing; Zhou, Jixue |
| 作者单位 | 1.Weihai Wanfeng Magnesium S&T Dev Co Ltd, Weihai 264200, Peoples R China 2.Qilu Univ Technol, Adv Mat Inst, Shandong Prov Key Lab High Strength Lightweight M, Shandong Acad Sci, Jinan 250014, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 4.Univ Adelaide, Sch Mech Engn, Adelaide, SA 5005, Australia |
| 推荐引用方式 GB/T 7714 | Zhao, Dongqing,Li, Guanyu,Li, Peiliang,et al. A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2021,803:9. |
| APA | Zhao, Dongqing.,Li, Guanyu.,Li, Peiliang.,Zhou, Jixue.,Cheng, Kaiming.,...&Wang, Xitao.(2021).A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,803,9. |
| MLA | Zhao, Dongqing,et al."A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 803(2021):9. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。