Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening
文献类型:期刊论文
作者 | Ren, C. X.1,2; Wang, Q.1; Hou, J. P.1; Zhang, Z. J.1; Zhang, Z. F.1,2 |
刊名 | MATERIALS CHARACTERIZATION
![]() |
出版日期 | 2021-07-01 |
卷号 | 177页码:10 |
关键词 | Metallic materials Surface strengthening Work-hardening Strength Microhardness Gradient microstructure |
ISSN号 | 1044-5803 |
DOI | 10.1016/j.matchar.2021.111179 |
通讯作者 | Wang, Q.() ; Zhang, Z. F.() |
英文摘要 | The gradient layer induced by surface mechanical strengthening attracts plenty of attention as it can effectively improve the service performance of metallic materials, but how to design a suitable gradient layer and evaluate gradient layer properties need to be investigated further. In this work, the 316 stainless steel and TC4 alloy processed by surface spinning strengthening (3S) were investigated, including the work-hardening capacity before the 3S treatment and gradient layer properties after the 3S treatment. Results show that 316 stainless steel has a higher work-hardening capacity compared to the TC4 alloy before the 3S treatment; the maximum microhardness increment ratio, thickness of gradient layer and surface strengthening energy are also higher, and surface strengthening exponent is lower in the 316 stainless steel compared to the TC4 alloy after the 3S treatment. In addition, the exponential relation between the maximum microhardness increment ratio and workhardening exponent, the exponential relation between the thickness of gradient layer and work-hardening exponent, the power function relation between the surface strengthening exponent and work-hardening exponent, and the linear relation between the surface strengthening energy and surface strengthening exponent are studied, respectively. Based on the above results and analysis, the microhardness distributions of gradient layer were discussed based on the work-hardening capacity, and the effects of the work-hardening capacity of the asreceived metallic materials on the gradient layer properties of the surface strengthened metallic materials were summarized. |
资助项目 | National Natural Science Foundation of China (NSFC)[U1664253] ; LiaoNing Revitalization Talents Program[XLYC1808027] |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
语种 | 英语 |
WOS记录号 | WOS:000659514000001 |
出版者 | ELSEVIER SCIENCE INC |
资助机构 | National Natural Science Foundation of China (NSFC) ; LiaoNing Revitalization Talents Program |
源URL | [http://ir.imr.ac.cn/handle/321006/160569] ![]() |
专题 | 金属研究所_中国科学院金属研究所 |
通讯作者 | Wang, Q.; Zhang, Z. F. |
作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Ren, C. X.,Wang, Q.,Hou, J. P.,et al. Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening[J]. MATERIALS CHARACTERIZATION,2021,177:10. |
APA | Ren, C. X.,Wang, Q.,Hou, J. P.,Zhang, Z. J.,&Zhang, Z. F..(2021).Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening.MATERIALS CHARACTERIZATION,177,10. |
MLA | Ren, C. X.,et al."Effect of work-hardening capacity on the gradient layer properties of metallic materials processed by surface spinning strengthening".MATERIALS CHARACTERIZATION 177(2021):10. |
入库方式: OAI收割
来源:金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。