A simplified formulation for predicting wrinkling of thin-wall elbow tube in granular media-based push-bending process
文献类型：期刊论文
| 作者 | Liu, Hai1; Zhang, Shi-Hong2; Ding, Yun-Peng1; Shi, Gao-Lian1; Geng, Zhe1 |
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2021-05-11 |
| 页码 | 9 |
| ISSN号 | 0268-3768 |
| 关键词 | Elbow tube Wrinkling Granular media FEM-DEM coupling Push bending |
| DOI | 10.1007/s00170-021-07168-2 |
| 通讯作者 | Zhang, Shi-Hong(shzhang@imr.ac.cn) ; Ding, Yun-Peng(dyp_112@163.com) |
| 英文摘要 | Wrinkling is the key forming defect in thin-wall tube bending process, when the wall thickness-to-diameter ratio is smaller than 0.01. The granular media-based thin-wall elbow push-bending process involves filling a tube with spherical particles and pushing the tube into a die to bend a tubular blank into an elbow shape. If the wall thickness of tube is smaller than the particle size, wrinkling significantly depends on micro contact force distribution in granular media, and the granular media cannot be approximately simulated by FEM. In the present paper, an elbow tube with 0.3 mm wall thickness, 30 mm outer diameter, and 90 mm bending radius is formed by granular media-based push-bending process. The wrinkling is investigated; especially, the micro contact force distribution at the initial buckling location is observed based on a 3D FEM-DEM coupling model. In the coupling model, FEM is used to simulate bending deformation of tubular blank, and DEM is used to simulate micro contact forces of particle flow. Finally, a simplified formulation is proposed for predicting wrinkling of thin-wall elbow tube in granular media-based push-bending process and validated by experiment of an elbow tube with 0.7 mm wall thickness, 70 mm outer diameter, and 105 mm bending radius. |
| 资助项目 | project of Suzhou Key Laboratory Foundation[SZS201815] |
| WOS研究方向 | Automation & Control Systems ; Engineering |
| 语种 | 英语 |
| 出版者 | SPRINGER LONDON LTD |
| WOS记录号 | WOS:000649258400001 |
| 资助机构 | project of Suzhou Key Laboratory Foundation |
| 源URL | [http://ir.imr.ac.cn/handle/321006/160908]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Zhang, Shi-Hong; Ding, Yun-Peng |
| 作者单位 | 1.Suzhou Vocat Inst Ind Technol, Dept Precis Mfg Engn, 1 Zhineng Ave, Suzhou 215104, Peoples R China 2.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Liu, Hai,Zhang, Shi-Hong,Ding, Yun-Peng,et al. A simplified formulation for predicting wrinkling of thin-wall elbow tube in granular media-based push-bending process[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2021:9. |
| APA | Liu, Hai,Zhang, Shi-Hong,Ding, Yun-Peng,Shi, Gao-Lian,&Geng, Zhe.(2021).A simplified formulation for predicting wrinkling of thin-wall elbow tube in granular media-based push-bending process.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,9. |
| MLA | Liu, Hai,et al."A simplified formulation for predicting wrinkling of thin-wall elbow tube in granular media-based push-bending process".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021):9. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。