Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by TIG Arc Additive Manufacturing
文献类型：期刊论文
| 作者 | Sun Jiaxiao1; Yang Ke1; Wang Qiuyu1; Ji Shanlin1; Bao Yefeng1; Pan Jie2 |
| 刊名 | ACTA METALLURGICA SINICA
 |
| 出版日期 | 2021-05-01 |
| 卷号 | 57期号:5页码:665-674 |
| ISSN号 | 0412-1961 |
| 关键词 | 5356 aluminum alloy tungsten inert gas welding (TIG) arc additive manufacturing microstructure mechanical property |
| DOI | 10.11900/0412.1961.2020.00266 |
| 通讯作者 | Yang Ke(yangke_hhuc@126.com) |
| 英文摘要 | 5356 aluminum alloy has been widely applied in transportation, aerospace and other fields owing to its low density, excellent fatigue property, and superior corrosion resistance. Aluminum alloy is widely manufactured by the arc additive technique that operates at a fast manufacturing speed with simple equipment and high material utilization. The property of 5356 aluminum alloy is closely related to its microstructure. To better control the property of this alloy for the additive manufacturing of forming parts, it is necessary to study the evolution of its microstructure. In this work, 5356 aluminum alloy forming parts were produced by tungsten inert gas welding (TIG) arc additive manufacturing, and their microstructures and mechanical properties were analyzed. The 5356 aluminum alloy formed by TIG additive manufacturing was composed of alpha-Al matrix and beta(Al3Mg2) phase. As the deposition height increased, the layer microstructure transformed from equiaxed grains to columnar grains and tended to stabilize at thermal equilibrium. The top layer exhibited a dendritic microstructure with serious segregation of the Mg element. The middle and lower microstructures were varied and included equiaxed grains, columnar grains, and a mixture of these, with improved Mg-element segregation. As the deposition height increased, the microhardness in the layer first decreased and then stabilized. The microhardness was larger in the inter-layers than in the deposition layers. The pores gathered in the interlayers might explain the lower yield strength of the thin-walled parts than the theoretically calculated value. The tensile strength, yield strength, and elongation were all anisotropic, and the tensile property was better in the transverse than in the longitudinal direction. This result was attributable to pore accumulation between the layers of the thin-walled parts and to the uneven microstructure. |
| 资助项目 | National Key Research and Development Program of China[2017YFE0100100] ; Changzhou Key Research and Development Plan (Social Development Science and Technology Support) |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | SCIENCE PRESS |
| WOS记录号 | WOS:000642002500010 |
| 资助机构 | National Key Research and Development Program of China ; Changzhou Key Research and Development Plan (Social Development Science and Technology Support) |
| 源URL | [http://ir.imr.ac.cn/handle/321006/161139]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Yang Ke |
| 作者单位 | 1.Hohai Univ, Coll Mech & Elect Engn, Changzhou 213022, Peoples R China 2.Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Sun Jiaxiao,Yang Ke,Wang Qiuyu,et al. Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by TIG Arc Additive Manufacturing[J]. ACTA METALLURGICA SINICA,2021,57(5):665-674. |
| APA | Sun Jiaxiao,Yang Ke,Wang Qiuyu,Ji Shanlin,Bao Yefeng,&Pan Jie.(2021).Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by TIG Arc Additive Manufacturing.ACTA METALLURGICA SINICA,57(5),665-674. |
| MLA | Sun Jiaxiao,et al."Microstructure and Mechanical Properties of 5356 Aluminum Alloy Fabricated by TIG Arc Additive Manufacturing".ACTA METALLURGICA SINICA 57.5(2021):665-674. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。