Influence of Geometric Structure and Feeding Behavior of Casting on Freckle Formation during Directional Solidification of a Ni-Based Single-Crystal Superalloy
文献类型：期刊论文
| 作者 | Han, Dongyu1,2; Jiang, Weiguo1,3; Xiao, Jiuhan1,2; Li, Kaiwen1; Lu, Yuzhang1; Lou, Langhong1 |
| 刊名 | CRYSTAL RESEARCH AND TECHNOLOGY
 |
| 出版日期 | 2021-03-22 |
| 页码 | 11 |
| ISSN号 | 0232-1300 |
| 关键词 | casting structures feeding behaviors freckles Ni‐ based superalloys single crystal |
| DOI | 10.1002/crat.202000197 |
| 通讯作者 | Jiang, Weiguo(jwg@wfust.edu.cn) |
| 英文摘要 | Determining the effect of casting geometric structure on freckle formation is important in designing the directional solidification parameter of single-crystal superalloy castings. In this research, single-crystal castings of a third-generation nickel (Ni)-based superalloy with different thicknesses and structures are prepared by conventional Bridgman high-rate-solidification technique at withdrawal rates of 1, 3, and 6 mm min(-1). The experimental results show that the freckles in castings with expansion structures are severer than those with contraction structures at a withdrawal rate of 1 mm min(-1), and vice versa at withdrawal rates of 3 and 6 mm min(-1). It is found that the larger casting thickness tends to promote the freckle formation at the same withdrawal rate. Furthermore, a lower tendency is displayed at the withdrawal rate of 3 mm min(-1) in freckle formation, whereas an increased tendency is displayed at the withdrawal rate of 6 mm min(-1). The different withdrawal rates, thicknesses, and structures of casting cause differences in cooling rate, shrinkage flow, and mushy zone morphology, which are believed to be responsible for the tendency of freckle formation. |
| 资助项目 | National Natural Science Foundation of China[51674235] ; National Science and Technology Major Project of China[2017VI-0001-0070] ; National Key Research and Development Program of China[2017YFB0702904] |
| WOS研究方向 | Crystallography |
| 语种 | 英语 |
| 出版者 | WILEY-V C H VERLAG GMBH |
| WOS记录号 | WOS:000631019300001 |
| 资助机构 | National Natural Science Foundation of China ; National Science and Technology Major Project of China ; National Key Research and Development Program of China |
| 源URL | [http://ir.imr.ac.cn/handle/321006/161351]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Jiang, Weiguo |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shichangxu Innovat Ctr Adv Mat, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 3.Univ Sci & Technol, Shouguang 262700, Shandong, Peoples R China |
| 推荐引用方式 GB/T 7714 | Han, Dongyu,Jiang, Weiguo,Xiao, Jiuhan,et al. Influence of Geometric Structure and Feeding Behavior of Casting on Freckle Formation during Directional Solidification of a Ni-Based Single-Crystal Superalloy[J]. CRYSTAL RESEARCH AND TECHNOLOGY,2021:11. |
| APA | Han, Dongyu,Jiang, Weiguo,Xiao, Jiuhan,Li, Kaiwen,Lu, Yuzhang,&Lou, Langhong.(2021).Influence of Geometric Structure and Feeding Behavior of Casting on Freckle Formation during Directional Solidification of a Ni-Based Single-Crystal Superalloy.CRYSTAL RESEARCH AND TECHNOLOGY,11. |
| MLA | Han, Dongyu,et al."Influence of Geometric Structure and Feeding Behavior of Casting on Freckle Formation during Directional Solidification of a Ni-Based Single-Crystal Superalloy".CRYSTAL RESEARCH AND TECHNOLOGY (2021):11. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。