Fluidity, Microstructure, and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x=0, 0.6, 1.2, 1.8) Alloy
文献类型：期刊论文
| 作者 | Cui, Jie2,3; Luo, Tianjiao1,3; Li, Yingju1,3; Feng, Xiaohui1,3; Huang, Qiuyan1,3; Yang, Yuansheng1,3 |
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2021-05-13 |
| 页码 | 12 |
| 关键词 | Magnesium alloy Melt viscosity Grain size Shrinkage Tensile properties |
| ISSN号 | 1006-7191 |
| DOI | 10.1007/s40195-021-01247-9 |
| 通讯作者 | Yang, Yuansheng(ysyang@imr.ac.cn) |
| 英文摘要 | In this paper, the influence of the Sn element on the melt viscosity, grain size, shrinkage, and tensile properties of the sub-rapidly solidified Mg-6Al-4Zn alloy was studied. The results showed that the melt viscosity of the Mg-6Al-4Zn alloy was greatly decreased because of the addition of Sn. As the content of Sn increased from 0 to 1.8 wt.%, the grain size of the alloy was refined, and the dendrite microstructure was changed to rose-shaped ones simultaneously. The decreased melt viscosity and refined microstructure were conductive to the feeding of melt, which contributed to the reduction in volume fraction of shrinkage. The volume fraction of shrinkage of the Mg-6Al-4Zn-1.2Sn alloy was reduced by 30.8%, compared with that of the alloy without Sn addition. Tensile properties of the Mg-6Al-4Zn-xSn alloys were increased firstly and then decreased with the augmented Sn content. The yield strength, ultimate tensile strength, and elongation of the alloy containing 1.2 wt.% Sn were 21.4%, 39.5%, and 259.0% higher than those of the alloy without Sn addition, respectively. The addition of Sn was considered to reduce the shrinkage of the sub-rapidly solidified Mg-6Al-4Zn magnesium alloy and thus improved its tensile properties. To identify the mechanism, the effect of Sn on the volume fraction of shrinkage was discussed from three aspects of melt viscosity, grain refinement, and volume fraction of eutectic phases. |
| 资助项目 | National Key Research and Development Program of China[2018YFE115800] ; Key Research and Development Project of Liaoning Province[2019JH2/10100008] ; Key Research and Development Plan of Shandong Province[2019JZZY020329] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000650107400001 |
| 出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
| 资助机构 | National Key Research and Development Program of China ; Key Research and Development Project of Liaoning Province ; Key Research and Development Plan of Shandong Province |
| 源URL | [http://ir.imr.ac.cn/handle/321006/161842]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Yang, Yuansheng |
| 作者单位 | 1.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China 3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cui, Jie,Luo, Tianjiao,Li, Yingju,et al. Fluidity, Microstructure, and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x=0, 0.6, 1.2, 1.8) Alloy[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2021:12. |
| APA | Cui, Jie,Luo, Tianjiao,Li, Yingju,Feng, Xiaohui,Huang, Qiuyan,&Yang, Yuansheng.(2021).Fluidity, Microstructure, and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x=0, 0.6, 1.2, 1.8) Alloy.ACTA METALLURGICA SINICA-ENGLISH LETTERS,12. |
| MLA | Cui, Jie,et al."Fluidity, Microstructure, and Tensile Properties of Sub-rapidly Solidified Mg-6Al-4Zn-xSn (x=0, 0.6, 1.2, 1.8) Alloy".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021):12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。