Microstructure and tensile properties of Ni nano particles modified MXene reinforced copper matrix composites
文献类型：期刊论文
| 作者 | Li, Mengqi2; Wang, Shoukun1; Wang, Qinhuan2; Ren, Fuqiang2; Wang, Yu2 |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2021-03-18 |
| 卷号 | 808页码:10 |
| 关键词 | Ni-MXene hybrids Wettability Copper matrix composites Tensile properties |
| ISSN号 | 0921-5093 |
| DOI | 10.1016/j.msea.2021.140932 |
| 英文摘要 | The wettability of reinforcement particles with metal matrix plays a vital role in particles dispersion in matrix and their interfacial bond. In this study, the Ni-MXene hybrids were firstly fabricated by molecular-level mixing and chemical reduction. Then the Ni-MXene-Cu composite powders were prepared by high energy ball milling, and the Ni-MXene/Cu composites were further prepared by hot pressing the composite powders. The wettability of MXene and Ni-MXene with Cu matrix was studied by the Cu diffusion phenomena at the interface. The study results indicate that the initial MXene has a poor wettability with Cu matrix because of the surface functional groups, while the Ni-MXene can wet well with the matrix by interdiffusion of Cu and Ni elements at the interface. The good wettability promotes Cu matrix diffuse to the inside of the agglomerated MXene particles, and thus to effectively improve the tensile properties of the composites. Both the UTS and the elongation of the Ni-MXene/Cu composites are obvious higher than those of MXene/Cu composites, especially in the composites with lower milling time. The maximum UTS and elongation of the 3(Ni-MXene)/Cu-12 h can reach to 325 MPa and 16.1%, respectively. The tensile properties and the failure mechanism were further analyzed and discussed by comparing the fracture surface morphologies. |
| 资助项目 | National Natural Science Foundation of China[51701205] ; National Natural Science Foundation of China[21875256] ; Independent Research Funds of State Key Laboratory of MultiPhase Complex Systems of China[MPCS-2017-A-05] |
| WOS研究方向 | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000632048600001 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Natural Science Foundation of China ; Independent Research Funds of State Key Laboratory of MultiPhase Complex Systems of China |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/48169]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Wang, Yu |
| 作者单位 | 1.Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China 2.Chinese Acad Sci, State Key Lab Multiphase Complex Syst, Inst Proc Engn, Beijing 100190, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Mengqi,Wang, Shoukun,Wang, Qinhuan,et al. Microstructure and tensile properties of Ni nano particles modified MXene reinforced copper matrix composites[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2021,808:10. |
| APA | Li, Mengqi,Wang, Shoukun,Wang, Qinhuan,Ren, Fuqiang,&Wang, Yu.(2021).Microstructure and tensile properties of Ni nano particles modified MXene reinforced copper matrix composites.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,808,10. |
| MLA | Li, Mengqi,et al."Microstructure and tensile properties of Ni nano particles modified MXene reinforced copper matrix composites".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 808(2021):10. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。