Study of W/Cu flat-type mock-ups with novel hypervapotron cooling structure for CFETR divertor
文献类型：期刊论文
| 作者 | Chen, Zhen1,2; Li, Qiang2 ; Peng, Wuqingliang1,2; Wei, Ran2; Wang, Wanjing2; Jiang, Kecheng2; Wang, Jichao2; Pan, Zhiwei1; Xie, Chunyi2; Geng, Xiang2
|
| 刊名 | FUSION ENGINEERING AND DESIGN
 |
| 出版日期 | 2021-11-01 |
| 卷号 | 172 |
| 关键词 | Plasma facing component Flat-type Hypervapotron Divertor |
| ISSN号 | 0920-3796 |
| DOI | 10.1016/j.fusengdes.2021.112919 |
| 通讯作者 | Li, Qiang(liqiang577@ipp.ac.cn) |
| 英文摘要 | A hypervapotron cooling concept armored with flat tiles has been considered as a possible technique to handle heat load about 10-20 MW/m(2) produced in a fusion reactor. In order to improve the heat removal capability of divertor plasma facing components (PFCs) of the China Fusion Engineering Test Reactor (CFETR), W/Cu flat-type mock-up based on a novel hypervapotron cooling concept with cross-ribs structure has been designed and optimized by thermal simulations using ANSYS Fluent code. The simulation results demonstrated obviously that this cross-ribs structure has an excellent heat removal capability caused by enlarged heat transfer area and subcooled flow boiling. Based on the optimized geometry, the novel W-Cu/CuCrZr/316 L compound module was prepared by means of one-step hot isostatic pressing (HIP) technique. The following high heat flux (HHF) testing results indicated that bonding technologies and mock-up design have reached a good performance. |
| WOS关键词 | PLASMA-FACING COMPONENTS ; 1ST WALL ; HEAT-TRANSFER ; ITER ; PERFORMANCE ; CFD |
| 资助项目 | National Key R&D Program of China[2017YFE0300604] ; Major/Innovative Program of Development Foundation of Hefei Center for Physical Science and Technology[2018ZYFX001] ; CASHIPS Director's Fund[YZJJ2021QN17] ; China Post-doctoral Science Foundation[2021M693215] ; Anhui Province Key Laboratory of Special Welding Technology |
| WOS研究方向 | Nuclear Science & Technology |
| 语种 | 英语 |
| WOS记录号 | WOS:000718115500004 |
| 出版者 | ELSEVIER SCIENCE SA |
| 资助机构 | National Key R&D Program of China ; Major/Innovative Program of Development Foundation of Hefei Center for Physical Science and Technology ; CASHIPS Director's Fund ; China Post-doctoral Science Foundation ; Anhui Province Key Laboratory of Special Welding Technology |
| 源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/126550]  |
| 专题 | 中国科学院合肥物质科学研究院 |
| 通讯作者 | Li, Qiang |
| 作者单位 | 1.Univ Sci & Technol China, Hefei 230026, Peoples R China 2.Chinese Acad Sci, Inst Plasma Phys, Hefei Inst Phys Sci, Hefei 230031, Peoples R China |
| 推荐引用方式 GB/T 7714 | Chen, Zhen,Li, Qiang,Peng, Wuqingliang,et al. Study of W/Cu flat-type mock-ups with novel hypervapotron cooling structure for CFETR divertor[J]. FUSION ENGINEERING AND DESIGN,2021,172. |
| APA | Chen, Zhen.,Li, Qiang.,Peng, Wuqingliang.,Wei, Ran.,Wang, Wanjing.,...&Luo, Guangnan.(2021).Study of W/Cu flat-type mock-ups with novel hypervapotron cooling structure for CFETR divertor.FUSION ENGINEERING AND DESIGN,172. |
| MLA | Chen, Zhen,et al."Study of W/Cu flat-type mock-ups with novel hypervapotron cooling structure for CFETR divertor".FUSION ENGINEERING AND DESIGN 172(2021). |
入库方式： OAI收割
来源：合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。