Effect of Scanning Path on Microstructure and Tensile Property of GH3536 Alloy Fabricated by Laser Solid Forming
文献类型：期刊论文
| 作者 | Zhang Xue2; Liang Jingjing1; Ci Shiwei1; Yang Shulin1; Li Jinguo1; Liu Changsheng2 |
| 刊名 | RARE METAL MATERIALS AND ENGINEERING
 |
| 出版日期 | 2021-09-01 |
| 卷号 | 50期号:9页码:3225-3232 |
| 关键词 | GH3536 alloy laser solid forming scanning path microstructure tensile property |
| ISSN号 | 1002-185X |
| 通讯作者 | Liu Changsheng(csliu@mail.neu.edu.cn) |
| 英文摘要 | Metallographic microscope, XRD, SEM and tensile testing methods were used to explore the influence of 45 degrees cross grating and zig-zag cross grating scanning paths on GH3536 alloy fabricated by laser solid forming (LSF). The results show that the two scanning paths have little effect on the microstructure of GH3536 alloy. The substrate of GH3536 alloy with two scanning paths are y phase. There are two types of carbides, M23C6 and M6C. The heat accumulation of zig-zag cross grating is slightly higher than that of 45 degrees cross grating, resulting in larger porosity and a higher forming height. The tensile properties of GH3536 alloy with two scanning paths are similar. The fracture mode is ductile fracture. The cracks occurs at the carbide, and are mainly transgranular fracture. |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000708582000026 |
| 出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
| 源URL | [http://ir.imr.ac.cn/handle/321006/167202]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu Changsheng |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Northeastern Univ, Key Lab Anisotropy & Texture Mat, Minist Educ, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang Xue,Liang Jingjing,Ci Shiwei,et al. Effect of Scanning Path on Microstructure and Tensile Property of GH3536 Alloy Fabricated by Laser Solid Forming[J]. RARE METAL MATERIALS AND ENGINEERING,2021,50(9):3225-3232. |
| APA | Zhang Xue,Liang Jingjing,Ci Shiwei,Yang Shulin,Li Jinguo,&Liu Changsheng.(2021).Effect of Scanning Path on Microstructure and Tensile Property of GH3536 Alloy Fabricated by Laser Solid Forming.RARE METAL MATERIALS AND ENGINEERING,50(9),3225-3232. |
| MLA | Zhang Xue,et al."Effect of Scanning Path on Microstructure and Tensile Property of GH3536 Alloy Fabricated by Laser Solid Forming".RARE METAL MATERIALS AND ENGINEERING 50.9(2021):3225-3232. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。