Mechanical properties and abrasive wear behaviors of in situ nano-TiCx-Al-Zn-Mg-Cu composites fabricated by combustion synthesis and hot press consolidation
文献类型：期刊论文
| 作者 | Gao, Y. Y.; Qiu, F.; Shu, S. L.; Wang, L. ; Chang, F.; Hu, W.; Han, X.; Li, Q.; Jiang, Q. C.
|
| 刊名 | Archives of Civil and Mechanical Engineering
 |
| 出版日期 | 2018 |
| 卷号 | 18期号:1页码:179-187 |
| 关键词 | In situ nano TiCx Al-Zn-Mg-Cu composites Combustion synthesis Compressive properties metal-matrix composites reinforcement particles strength carbon b4c Engineering Materials Science |
| ISSN号 | 1644-9665 |
| DOI | 10.1016/j.acme.2017.06.009 |
| 英文摘要 | The in situ nano-TiCx/Al-Zn-Mg-Cu composites with different TiCx content (20, 25 and 30 vol.%) were successfully fabricated by combustion synthesis and hot press consolidation in Al-Ti-C/CNTs systems. The compressive properties and abrasive wear resistance of the composites improved with the increase in the TiCx content. The transformation of carbon source from pure C black to the mixture of C black and CNTs to pure CNTs in Al-Ti-C/CNTs systems leaded to a significant improvement in the compressive properties and wear resistance of the composites as well as a significant decrease in the average size of TiCx particles. The average size of the nano-TiCx particles in 30 vol.% TiCx/Al-Zn-Mg-Cu composite synthesized by the carbon source of CNTs reached 81 nm, moreover, the yield strength (sigma(0.2)), the ultimate compression strength (sigma(UCS)) and the fracture strain (epsilon(f)) of the composite reached 597 MPa, 882 MPa and 21.7%, respectively. (C) 2017 Politechnika Wroclawska. Published by Elsevier Sp. z o.o. All rights reserved. |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/60721]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | Gao, Y. Y.,Qiu, F.,Shu, S. L.,et al. Mechanical properties and abrasive wear behaviors of in situ nano-TiCx-Al-Zn-Mg-Cu composites fabricated by combustion synthesis and hot press consolidation[J]. Archives of Civil and Mechanical Engineering,2018,18(1):179-187. |
| APA | Gao, Y. Y..,Qiu, F..,Shu, S. L..,Wang, L..,Chang, F..,...&Jiang, Q. C..(2018).Mechanical properties and abrasive wear behaviors of in situ nano-TiCx-Al-Zn-Mg-Cu composites fabricated by combustion synthesis and hot press consolidation.Archives of Civil and Mechanical Engineering,18(1),179-187. |
| MLA | Gao, Y. Y.,et al."Mechanical properties and abrasive wear behaviors of in situ nano-TiCx-Al-Zn-Mg-Cu composites fabricated by combustion synthesis and hot press consolidation".Archives of Civil and Mechanical Engineering 18.1(2018):179-187. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。