Structural design of primary mirror subassembly for spatial gravitational wave telescope
文献类型：期刊论文
| 作者 | Li, Yupeng; Wang, Zhi ; Sha, Wei; Wu, Qingwen; Zhao, Ya
|
| 刊名 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
 |
| 出版日期 | 2018 |
| 卷号 | 47期号:8 |
| 关键词 | Optical testing Gravitational effects Gravity waves Ground supports Mirrors Modal analysis Optimization Quality control Structural design Telescopes Unloading Vibration analysis Wavefronts |
| ISSN号 | 10072276 |
| DOI | 10.3788/IRLA201847.0818004 |
| 英文摘要 | Aiming at the extremely high optical path stability requirements of the spatial gravitational wave telescope in the order of picometer, the main mirror components in the system were optimized. Zerodur was chosen as the material of the primary mirror, the support structure was Invar. Firstly, through the optimization of the parameters of the mirror analysis, while ensuring the accuracy of the surface, the mirror light weight rate reached 72%. Then a biaxial joint Bipod flexible mirror support structure was designed, using the side of the three-point support form. In order to ensure the effective support stiffness and unloading effect, the mathematical model of the mechanism was established, and its size parameters were optimized based on Matlab. Finally, the modal analysis and vibration test of the primary mirror components were optimized, and the on-orbit analysis and wavefront quality calculation were completed. The results show that the first-order natural frequency of the primary mirror component is 373 Hz, and the relative error of the test result is 3.5%. The main mirror accuracy is 8.9 nm(RMS); wavefront accuracy is /5(=1 064 nm). The analysis results show that the reflector assembly meets the design requirements. 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/60817]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | Li, Yupeng,Wang, Zhi,Sha, Wei,et al. Structural design of primary mirror subassembly for spatial gravitational wave telescope[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2018,47(8). |
| APA | Li, Yupeng,Wang, Zhi,Sha, Wei,Wu, Qingwen,&Zhao, Ya.(2018).Structural design of primary mirror subassembly for spatial gravitational wave telescope.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,47(8). |
| MLA | Li, Yupeng,et al."Structural design of primary mirror subassembly for spatial gravitational wave telescope".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 47.8(2018). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。