Topological optimization design for SM system of large aperture telescope
文献类型：期刊论文
| 作者 | Zhang, Limin; Han, Xida; Lv, Tianyu; Zhao, Hongchao |
| 刊名 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
 |
| 出版日期 | 2018 |
| 卷号 | 47期号:8 |
| 关键词 | Topology Deformation Finite element method Shape optimization Structural design Telescopes Trusses |
| ISSN号 | 10072276 |
| DOI | 10.3788/IRLA201847.0818008 |
| 英文摘要 | Aiming at the precision requirement of machining and assembling for the SM system of the large-aperture grounded telescope, a design method for the structure of SM system based on topology optimization was presented. Based on the variable density idea of topology optimization, the ground structure was restricted to be the Spider and Serrurie trusses, the target was that the deformation along the expected direction was minimized, and the last appearance and dimension were described by whether the material was deleted from the ground structure or not. Firstly, the relative density was taken as design variable, and then by using 1st modal and deformation in gravity direction for the Spider and deformation along the X and Y axis for the truss as a design restraint, a topology optimization model was established. Secondly, on the basis of concept structure obtained by topology optimization, it was iterated and optimized by using Workbench. Finally, the optimized parameter was set, and the static and dynamic stiffness was analyzed and optimized using the finite element method. It shows that the 1st modal in the 4 m telescope SM system is 22.7 Hz, and the deviation in the direction of the gravity is -0.173 mm and -0.195 mm when the optical axis is parallel and vertical to the gravity direction, and the lightweight ratio exceeds 30% for the Spider and Serrurier truss, respectively. The results demonstrate the validity of the proposed approach properly. 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/60842]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | Zhang, Limin,Han, Xida,Lv, Tianyu,et al. Topological optimization design for SM system of large aperture telescope[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2018,47(8). |
| APA | Zhang, Limin,Han, Xida,Lv, Tianyu,&Zhao, Hongchao.(2018).Topological optimization design for SM system of large aperture telescope.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,47(8). |
| MLA | Zhang, Limin,et al."Topological optimization design for SM system of large aperture telescope".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 47.8(2018). |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。