中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 长春光学精密机械与物理研究所
  3. 中国科学院长春光学精密机械与物理研究所
Analysis and correction for measurement error of edge sensors caused by deformation of guide flexure applied in the Thirty Meter Telescope SSA

文献类型：期刊论文

作者Cao, H. F.; Zhang, J. X.; Yang, F.; An, Q. C.; Zhao, H. C.; Guo, P.
刊名Applied Optics
出版日期2018
卷号57期号:13页码:3401-3409
ISSN号1559-128X
关键词primary mirror active control e-elt vibrations design system tmt Optics
DOI10.1364/ao.57.003401
英文摘要The Thirty Meter Telescope (TMT) project will design and build a 30-m-diameter telescope for research in astronomy in visible and infrared wavelengths. The primary mirror of TMT is made up of 492 hexagonal mirror segments under active control. The highly segmented primary mirror will utilize edge sensors to align and stabilize the relative piston, tip, and tilt degrees of segments. The support systemassembly (SSA) of the segmented mirror utilizes a guide flexure to decouple the axial support and lateral support, while its deformation will cause measurement error of the edge sensor. We have analyzed the theoretical relationship between the segment movement and the measurement value of the edge sensor. Further, we have proposed an error correction method with amatrix. The correction process and the simulation results of the edge sensor will be described in this paper. (C) 2018 Optical Society of America
源URL[http://ir.ciomp.ac.cn/handle/181722/60909]  
专题中国科学院长春光学精密机械与物理研究所
推荐引用方式
GB/T 7714		 Cao, H. F.,Zhang, J. X.,Yang, F.,et al. Analysis and correction for measurement error of edge sensors caused by deformation of guide flexure applied in the Thirty Meter Telescope SSA[J]. Applied Optics,2018,57(13):3401-3409.
APA Cao, H. F.,Zhang, J. X.,Yang, F.,An, Q. C.,Zhao, H. C.,&Guo, P..(2018).Analysis and correction for measurement error of edge sensors caused by deformation of guide flexure applied in the Thirty Meter Telescope SSA.Applied Optics,57(13),3401-3409.
MLA Cao, H. F.,et al."Analysis and correction for measurement error of edge sensors caused by deformation of guide flexure applied in the Thirty Meter Telescope SSA".Applied Optics 57.13(2018):3401-3409.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。