Residual aberration correction method of the three-mirror anastigmat (TMA) system with a real exit pupil using freeform surface
文献类型：期刊论文
| 作者 | Meng, Q. Y.; Wang, H. Y.; Yan, Z. Q. |
| 刊名 | Optics and Laser Technology
 |
| 出版日期 | 2018 |
| 卷号 | 106页码:100-106 |
| 关键词 | Geometric optical design Optical freeform surface Mirror system design Aberration compensation front fog lamp design method telescope field integration mirror Optics Physics |
| ISSN号 | 0030-3992 |
| DOI | 10.1016/j.optlastec.2018.03.035 |
| 英文摘要 | The goal of the letter is to reduce the manufacturing and alignment difficulty of a large-scale optical system with a real exit pupil on the premise of ensuring the high-quality imaging. An optical system residual aberration correction method by inserting a quasi-planar freeform mirror (QFM) near the exit pupil position is proposed, and here we define the residual aberration is caused by the reduced tolerance of the manufacturing and alignment. By correction analysis, the mathematical model with the QFM sensitivity matrix as the core has been established. In order to verify the residual aberration correction effectiveness and method of the QFM, a set of real manufactured mirrors shape errors and mirrors positions misalignments are introduced on a well-designed three-mirror-anastigmatic (TMA) system with an aperture of 2 meters, a focal ratio of f/12 and a field of view (FOV) of 1.2 degrees to simulate optical system imaging quality damaged condition, and these errors cause the system imaging degeneration to RMS wavefront error (WFE) 0.331 lambda. Based on the QFM correction method, the system RMS WFE is corrected from the damaged imaging quality 0.331 lambda to 0.062 lambda. The QFM tolerance analysis shows that the QFM has looser precision requirements of manufacturing and alignment. By the verification, it shows this method can correct system residual aberration which caused by mirror manufacturing and alignment errors well at one time, and the TMA system has become less strict in manufacturing and alignment requirements by this way than before. The QFM correction ability and the correction method are effective. (C) 2018 Elsevier Ltd. All rights reserved. |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/61136]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | Meng, Q. Y.,Wang, H. Y.,Yan, Z. Q.. Residual aberration correction method of the three-mirror anastigmat (TMA) system with a real exit pupil using freeform surface[J]. Optics and Laser Technology,2018,106:100-106. |
| APA | Meng, Q. Y.,Wang, H. Y.,&Yan, Z. Q..(2018).Residual aberration correction method of the three-mirror anastigmat (TMA) system with a real exit pupil using freeform surface.Optics and Laser Technology,106,100-106. |
| MLA | Meng, Q. Y.,et al."Residual aberration correction method of the three-mirror anastigmat (TMA) system with a real exit pupil using freeform surface".Optics and Laser Technology 106(2018):100-106. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。