中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 长春光学精密机械与物理研究所
  3. 中国科学院长春光学精密机械与物理研究所
Ultra-low-distortion optical system design based on tolerance sensitivity optimization

文献类型：期刊论文

作者K.Zhang; X.Zhong; W.Wang; Y.Meng; J.Liu
刊名Optics Communications
出版日期2019
卷号437页码:231-236
关键词Ultra-low distortion,Optical design,Primary aberration,Tolerance,sensitivity,Optimization,Optics
ISSN号0030-4018
DOI10.1016/j.optcom.2018.12.059
英文摘要This study theoretically analyzed the relationship between the primary aberrations and tolerances to meet the distortion requirements of an ultra-low-distortion optical system. Theoretical analysis shows that the distortion sensitivities of the optical system are related to the primary aberrations of the optical surfaces. Consequently, a method of optimizing the primary aberrations on the surface of the optical system to reduce the distortion sensitivities of sensitive tolerances is proposed. A distortion sensitivity analysis of manufacturing and assembly tolerance was carried out for the designed ultra-low-distortion and telecentric optical system. The distortion sensitivities of the sensitive tolerances were reduced by optimizing the primary aberrations on the surface of the optical system. A Monte Carlo analysis of the optimized ultra-low-distortion optical system showed that the proposed method has a remarkable effect on the distortion sensitivity optimization of the tolerances.
语种英语
源URL[http://ir.ciomp.ac.cn/handle/181722/62805]  
专题中国科学院长春光学精密机械与物理研究所
推荐引用方式
GB/T 7714		 K.Zhang,X.Zhong,W.Wang,et al. Ultra-low-distortion optical system design based on tolerance sensitivity optimization[J]. Optics Communications,2019,437:231-236.
APA K.Zhang,X.Zhong,W.Wang,Y.Meng,&J.Liu.(2019).Ultra-low-distortion optical system design based on tolerance sensitivity optimization.Optics Communications,437,231-236.
MLA K.Zhang,et al."Ultra-low-distortion optical system design based on tolerance sensitivity optimization".Optics Communications 437(2019):231-236.

入库方式： OAI收割

来源：长春光学精密机械与物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。