Design and Assessment of a 6-DOF Micro/Nanopositioning System
文献类型：期刊论文
| 作者 | D.F.Zhang; P.Z.Li; J.G.Zhang; H.N.Chen; K.Guo; M.Y.Ni |
| 刊名 | Ieee-Asme Transactions on Mechatronics
 |
| 出版日期 | 2019 |
| 卷号 | 24期号:5页码:2097-2107 |
| 关键词 | Fasteners,Solid modeling,Optics,Physics,Actuators,Manufacturing,processes,End effectors,Flexure mechanisms,mechanical design,micro,nanopositioning,parallel positioning system,six degree-of-freedom,(6-DOF),purpose positioner-fixture,parallel manipulator,stage,mechanism,2-dof,3-dof,Automation & Control Systems,Engineering |
| ISSN号 | 1083-4435 |
| DOI | 10.1109/tmech.2019.2931619 |
| 英文摘要 | A six degree-of-freedom (6-DOF) parallel positioning system with high resolution, high repeatability, and low parasitic motions was proposed. It mainly consists of three identical limbs. Each limb consists of two symmetrical six prismatic-universal-spherical branches. First, the design process for a novel 6-DOF limb with input displacement reduction was introduced. By applying bipods and linear displacement output mechanisms, these novel limbs with symmetric configurations were designed. Moreover, a numerical compliance/stiffness model of the proposed mechanism was built based on the matrix method. This numerical model was verified by ANSYS finite-element analysis (FEA) software package. Hence, the input stiffness, the output compliance, and the stroke of the mechanism can be theoretically estimated. Furthermore, a prototype made of stainless steel 431 was successfully manufactured by wire electrical discharge machining process. It is actuated and sensed by piezoactuators and capacitive displacement sensors, respectively. Finally, the working performances of this proposed mechanism were experimentally investigated. It shows that the spatial resolution can be achieved in 10nm 10nm 5nm 100 nrad 100 nrad 200 nrad in an open-loop control. The closed-loop positioning accuracy in 3 (, standard error) can reach 30nm 30nm 15nm 150 nrad 150 nrad 300 nrad. The experimental results not only validate the effectiveness of the proposed positioning system but also verify the nanometer-scale spatial positioning accuracy within several tens of micrometers stroke range. The proposed micro/nanopositioning system may expand the actual application of alignment optical elements in projection lenses of 193nm immersion lithography. |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/62820]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | D.F.Zhang,P.Z.Li,J.G.Zhang,et al. Design and Assessment of a 6-DOF Micro/Nanopositioning System[J]. Ieee-Asme Transactions on Mechatronics,2019,24(5):2097-2107. |
| APA | D.F.Zhang,P.Z.Li,J.G.Zhang,H.N.Chen,K.Guo,&M.Y.Ni.(2019).Design and Assessment of a 6-DOF Micro/Nanopositioning System.Ieee-Asme Transactions on Mechatronics,24(5),2097-2107. |
| MLA | D.F.Zhang,et al."Design and Assessment of a 6-DOF Micro/Nanopositioning System".Ieee-Asme Transactions on Mechatronics 24.5(2019):2097-2107. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。