Thermal compensation design of truss structure for large-scale off-axis three-mirror space telescope
文献类型：期刊论文
| 作者 | L.Yang; L.Wei; L.Zhang |
| 刊名 | Optical Engineering
 |
| 出版日期 | 2019 |
| 卷号 | 58期号:2页码:9 |
| 关键词 | long focus,three-mirror anastigmat,space telescope,lamination design,thermal compensation design,modulation transfer function,Optics |
| ISSN号 | 0091-3286 |
| DOI | 10.1117/1.Oe.58.2.023109 |
| 英文摘要 | The image quality of the large-scale, long-focus, large field of view, off-axis three-mirror anastigmat space telescope will decrease dramatically due to the thermal effect. This paper studies the thermal deformation of the telescope, and based on its axial deformation, it proposes a passive thermal compensation design using truss rods made of carbon fiber-reinforced plastics, utilizing its thermal conducting design, which is determined by different spread quantity and spread angle of the lamination. Meanwhile, it satisfies the system stiffness requirement. First, the truss rods are divided into several independent triangles, according to the principle of equal axial distance after deformation, the function in terms of coefficient of thermal expansion (CTE) and length of truss rods is determined. Bonded by the optical tolerance requirement, the range of the CTE is obtained. Second, according to the CTE function, coupled with the stiffness requirement of the whole instrument, the CTE of each truss rod is determined. According to the CTE and stiffness requirement, the design of truss rods lamination is carried out. Finally, the group of truss rods with unequal CTE is obtained. The results have been validated by finite element analysis, vibration experiments, and image test, which indicate that the accuracy of the space telescope studied meets the requirements of optical tolerance; in addition, the rotation angle of the front panel around the X axis is competent, implying the stiffness requirement is solved. Moreover, the modulation transfer function at Nyquist frequency is better than 0.178 under the condition of 20 degrees C +/- 5 degrees C. (C) 2019 Society of Photo-Optical Instrumentation Engineers (SPIE) |
| 语种 | 英语 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/62879]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | L.Yang,L.Wei,L.Zhang. Thermal compensation design of truss structure for large-scale off-axis three-mirror space telescope[J]. Optical Engineering,2019,58(2):9. |
| APA | L.Yang,L.Wei,&L.Zhang.(2019).Thermal compensation design of truss structure for large-scale off-axis three-mirror space telescope.Optical Engineering,58(2),9. |
| MLA | L.Yang,et al."Thermal compensation design of truss structure for large-scale off-axis three-mirror space telescope".Optical Engineering 58.2(2019):9. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。