Design of air-bearing simulator for free-flying robot
文献类型：期刊论文
| 作者 | C.Xu; D.-W.Li; S.He; M.-Y.Xia; Z.-B.Xu; Z.-Y.Zhao |
| 刊名 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering
 |
| 出版日期 | 2019 |
| 卷号 | 27期号:2页码:352-362 |
| 关键词 | Simulators,Degrees of freedom (mechanics),Gas bearings,Machine design,Nozzles,Propulsion,Robots,Structural design |
| ISSN号 | 1004924X |
| DOI | 10.3788/OPE.20192702.0352 |
| 英文摘要 | To build a ground simulation experiment system for an in-orbit assembly, based on cold gas propulsion, we design a three-degrees-of-freedom free-flying robot simulator, and analyze the structural design, gas path system, dynamic modeling, and control system of the simulator. First, we adopt a modular design to partition the main structure of the simulator for different functions. Second, according to the working principle, we analyze and verify the bearing capacity of the simulator through an experiment. Subsequently, we arrange the nozzle in a partially decoupled way with the entire air path system, which is further designed. Then, we analyze the factors that influence the thrust size of the nozzle theoretically and verify them experimentally. Finally, we use the Newton-Euler method to establish the dynamic equation of the simulator. Simultaneously, combined with Simulink and Adams, we build a control simulation model and perform a motion simulation. The experimental results show that the simulator can carry a weight of more than 800 kg, with a force of 8 N on a single side and an overall running time of 30 min. Through simulation, we observe that the simulator has a good tracking effect on the reference input. The designed simulator can provide a mobile carrier for ground experiments of a super-redundant modular manipulator. 2019, Science Press. All right reserved. |
| URL标识 | 查看原文 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/62919]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | C.Xu,D.-W.Li,S.He,et al. Design of air-bearing simulator for free-flying robot[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2019,27(2):352-362. |
| APA | C.Xu,D.-W.Li,S.He,M.-Y.Xia,Z.-B.Xu,&Z.-Y.Zhao.(2019).Design of air-bearing simulator for free-flying robot.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,27(2),352-362. |
| MLA | C.Xu,et al."Design of air-bearing simulator for free-flying robot".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 27.2(2019):352-362. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。