Optimized design of high-mode main support structure for airborne spectrometer
文献类型：期刊论文
| 作者 | Y.Li; W.Liu; X.-H.Zhang; C.-X.Yan; Z.-Y.Gu |
| 刊名 | Guangxue Jingmi Gongcheng/Optics and Precision Engineering
 |
| 出版日期 | 2019 |
| 卷号 | 27期号:8页码:1783-1792 |
| 关键词 | Design,Aberrations,Ground supports,Optical transfer function,Remote sensing,Spectrometers,Thin walled structures,Vibration analysis |
| ISSN号 | 1004924X |
| DOI | 10.3788/OPE.20192708.1783 |
| 英文摘要 | To meet the requirements of high dynamic characteristics and overcome the low quality of the main support structure, an optimized design was devised and test verification of the main support structure was conducted. First, to solve the problem that classic support structures could not be applied to this system, a general structural form combining a frame-type structure and a thin-walled tubular structure was proposed. This form conveniently integrates the hood and structure to improve quality and ensure rigidity. Second, multi-variable integration optimization was adopted to improve the first-order mode from 127 to 156 Hz when the quality requirement was also met, thereby effectively improving the dynamic characteristics. Thereafter, to determine the influence of the vibration environment on the system MTF, the influence of the vibration environment on the system MTF was analyzed by combining finite element analysis and a sensitivity matrix. The scope of application demonstrates that the structure could be applied to an airborne system with a pixel size of 10 m. Finally, the effectiveness and feasibility of the design method and analysis process were verified by a vibration test and a wavefront aberration detection test. The optimized design method proposed in this paper can provide reference for the optimized design of airborne remote sensing instrument structures. This paper will contribute to the development of structure design techniques for airborne remote sensing instruments. 2019, Science Press. All right reserved. |
| URL标识 | 查看原文 |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/63239]  |
| 专题 | 中国科学院长春光学精密机械与物理研究所 |
| 推荐引用方式 GB/T 7714 | Y.Li,W.Liu,X.-H.Zhang,et al. Optimized design of high-mode main support structure for airborne spectrometer[J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2019,27(8):1783-1792. |
| APA | Y.Li,W.Liu,X.-H.Zhang,C.-X.Yan,&Z.-Y.Gu.(2019).Optimized design of high-mode main support structure for airborne spectrometer.Guangxue Jingmi Gongcheng/Optics and Precision Engineering,27(8),1783-1792. |
| MLA | Y.Li,et al."Optimized design of high-mode main support structure for airborne spectrometer".Guangxue Jingmi Gongcheng/Optics and Precision Engineering 27.8(2019):1783-1792. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。