Development of an adaptive CTM-RPIM method for modeling large deformation problems in geotechnical engineering
文献类型：期刊论文
| 作者 | Li, Jianguo4,5; Wang, Bin4,5; Jiang, Quan4,5; He, Benguo3; Zhang, Xue2; Vardon, Philip J.1 |
| 刊名 | ACTA GEOTECHNICA
 |
| 出版日期 | 2021-12-07 |
| 页码 | 19 |
| 关键词 | Alpha shape method Cartesian transformation method Geotechnical engineering Large deformation Radial point interpolation method |
| ISSN号 | 1861-1125 |
| DOI | 10.1007/s11440-021-01416-1 |
| 英文摘要 | In this paper, a meshfree method called adaptive CTM-RPIM is developed to model geotechnical problems with large deformation. The developed adaptive CTM-RPIM is a combination of the Cartesian transformation method (CTM), the radial point interpolation method (RPIM) and the alpha shape method. To reduce the requirement for meshes, the CTM is adopted to transform domain integrals into line integrals, and the RPIM is applied to construct interpolation functions. The alpha shape method, which is capable of capturing severe boundary evolution due to large deformations, is then introduced into the CTM-RPIM to form the adaptive CTM-RPIM. The accuracy of CTM-RPIM is first verified by considering a cantilever beam under small deformation, where the influence of key parameters on the simulation results is explored. Afterward, the ability of the adaptive CTM-RPIM to handle large deformation problems is demonstrated by simulating cantilever beams with large deformations for which analytical solutions are available. Finally, the ability of the proposed method to model the geotechnical large deformations is illustrated from both quasi-static and dynamic aspects, where a slope failure problem and a footing bearing capacity problem are modeled to evaluate the stability of geotechnical structures; and a 2-D soil collapse experiment using small aluminum bars is simulated to show the method capability in describing the soil flows. These benchmark examples demonstrate that the adaptive CTM-RPIM is a numerical method with broad application prospects for modeling large deformation problems in geotechnical engineering. |
| 资助项目 | National Natural Science Foundation of China[51979270] ; National Natural Science Foundation of China[51709258] ; CAS Pioneer Hundred Talents Program |
| WOS研究方向 | Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000727131200001 |
| 出版者 | SPRINGER HEIDELBERG |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/28322]  |
| 专题 | 中科院武汉岩土力学所 |
| 通讯作者 | Wang, Bin; Jiang, Quan |
| 作者单位 | 1.Delft Univ Technol, Geoengn Sect, Delft, Netherlands 2.Univ Liverpool, Dept Civil Engn & Ind Design, Liverpool, Merseyside, England 3.Northeastern Univ, Minist Educ Safe Min Deep Met Mines, Key Lab, Shenyang, Peoples R China 4.Univ Chinese Acad Sci, Beijing, Peoples R China 5.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Jianguo,Wang, Bin,Jiang, Quan,et al. Development of an adaptive CTM-RPIM method for modeling large deformation problems in geotechnical engineering[J]. ACTA GEOTECHNICA,2021:19. |
| APA | Li, Jianguo,Wang, Bin,Jiang, Quan,He, Benguo,Zhang, Xue,&Vardon, Philip J..(2021).Development of an adaptive CTM-RPIM method for modeling large deformation problems in geotechnical engineering.ACTA GEOTECHNICA,19. |
| MLA | Li, Jianguo,et al."Development of an adaptive CTM-RPIM method for modeling large deformation problems in geotechnical engineering".ACTA GEOTECHNICA (2021):19. |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。