Modelling slurry flowing and analyzing grouting efficiency under hydro-mechanical coupling using numerical manifold method
文献类型:期刊论文
作者 | Liu, Xuewei3,4; Chen, Haixiao2,4; Liu, Quansheng4; Liu, Bin4; He, Jun1 |
刊名 | ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS
![]() |
出版日期 | 2021 |
卷号 | 134页码:66-78 |
关键词 | Numerical manifold method Hydro-mechanical coupling Grouting Bingham fluid Deep roadway |
ISSN号 | 0955-7997 |
DOI | 10.1016/j.enganabound.2021.09.030 |
英文摘要 | Grouting is a typical HM (hydro-mechanical) coupling process between slurry and rock and widely used in underground engineering to reinforce the strength of fractured rock mass. In present work, based on numerical manifold method (NMM), an NMM-HM grouting model is proposed to investigate slurry flowing and analyze grouting efficiency. In this NMM-HM grouting model, the slurry flows in fractures and grouting pressure can cause fracture aperture variation and fracture propagation. Then, two numerical examples for central embedded crack and hydraulic fracturing are adopted to validate the presented model. Furthermore, grouting simulations are conducted on a multi-crack and a roadway with fracture networks. Results show that Grouting pressure in fractures can increase fracture aperture, which is beneficial for grouting efficiency. However, fluid pressure could also cause closure of neighboring fractures or even fracture propagation and failure of rock mass, which will weaken grouting effectiveness. Therefore, the coupled HM impacts on grouting efficiency and grouting pressure should be seriously considered and optimized to achieve the expected grouting performance in practice. |
资助项目 | National Natural Science Foundation of China[41807249] ; National Natural Science Foundation of China[51974289] ; Natural Science Foundation of Hubei Province[2019CFB535] |
WOS研究方向 | Engineering ; Mathematics |
语种 | 英语 |
WOS记录号 | WOS:000714606900006 |
出版者 | ELSEVIER SCI LTD |
源URL | [http://119.78.100.198/handle/2S6PX9GI/28346] ![]() |
专题 | 中科院武汉岩土力学所 |
通讯作者 | Liu, Xuewei |
作者单位 | 1.Minist Water Resources, Key Lab Geotech Mech & Engn, Changjiang River Sci Res Inst, Wuhan 430010, Peoples R China 2.China Univ Geosci, Fac Engn, Wuhan 430071, Peoples R China 3.Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia 4.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan 430071, Peoples R China |
推荐引用方式 GB/T 7714 | Liu, Xuewei,Chen, Haixiao,Liu, Quansheng,et al. Modelling slurry flowing and analyzing grouting efficiency under hydro-mechanical coupling using numerical manifold method[J]. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS,2021,134:66-78. |
APA | Liu, Xuewei,Chen, Haixiao,Liu, Quansheng,Liu, Bin,&He, Jun.(2021).Modelling slurry flowing and analyzing grouting efficiency under hydro-mechanical coupling using numerical manifold method.ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS,134,66-78. |
MLA | Liu, Xuewei,et al."Modelling slurry flowing and analyzing grouting efficiency under hydro-mechanical coupling using numerical manifold method".ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS 134(2021):66-78. |
入库方式: OAI收割
来源:武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。