Reproduction Method of Rockfall Geologic Hazards Based on Oblique Photography and Three-Dimensional Discontinuous Deformation Analysis
文献类型：期刊论文
| 作者 | Fu, Xiaodong3,4; Ding, Haifeng3,4; Sheng, Qian3,4; Chen, Jian2,3,4; Chen, He1; Li, Guo1; Fang, Liuyang1; Du, Wenjie3,4 |
| 刊名 | FRONTIERS IN EARTH SCIENCE
 |
| 出版日期 | 2021-10-22 |
| 卷号 | 9页码:17 |
| 关键词 | rockfall geologic hazard reproduction method oblique photography modeling technology dda |
| DOI | 10.3389/feart.2021.755876 |
| 英文摘要 | Rockfall geologic hazards are widely distributed. Due to their concealed nature, rockfalls are difficult to investigate using traditional contact survey methods, and the hazards they pose affect major projects and people's safety. Reproducing methods, including scene survey and movement process analysis, are primary tasks used to prevent these hazards; however, few reconstruction methods can directly apply the parameters of the rockfall geologic hazards obtained by the scene survey to evaluate the movement process. To address this problem, a method of reproduction based on oblique photography and three-dimensional discontinuous deformation analysis (3D-DDA) is proposed; the method consists of three key techniques (oblique photography, 3D rock block system modeling, and 3D rock block system analysis). First, geometric characteristic parameters of the terrain, rockfall, and discontinuities are extracted based on oblique photography using an unmanned aerial vehicle (UAV). Second, the block system model of rockfall is reconstructed by using 3D computational geometry theory and taking these geometric characteristic parameters as an input. Finally, the whole evolution process of rockfall geologic hazard, including initiation, movement, and accumulation, is simulated by the 3D-DDA method. To verify the practicability of this reproduction method, a typical rockfall geologic hazard, located in the K8 + 050 section of the Gaohai expressway, Yunnan, China, is studied. In addition, the characteristics of 19 dangerous rock masses in the survey area are clarified, and the geometric features of the discontinuities in the rock masses are extracted based on oblique photography using an UAV. The block system model of a potential rockfall is reconstructed, the movement trajectory is simulated by the 3D-DDA method, and the evolution process of velocity and kinetic energy of the rockfall verifies that the spatial layout of the current three-level passive protective nets system is reasonable. The case study indicates that the proposed method provides a geological and mechanical model for the risk assessment of rockfall geologic hazards. |
| WOS研究方向 | Geology |
| 语种 | 英语 |
| WOS记录号 | WOS:000716483600001 |
| 出版者 | FRONTIERS MEDIA SA |
| 源URL | [http://119.78.100.198/handle/2S6PX9GI/28352]  |
| 专题 | 中科院武汉岩土力学所 |
| 通讯作者 | Fu, Xiaodong; Du, Wenjie |
| 作者单位 | 1.Broadvis Engn Consultants, Natl Engn Lab Surface Transportat Weather Impact, Kunming, Yunnan, Peoples R China 2.China Pakistan Joint Res Ctr Earth Sci, Islamabad, Pakistan 3.Univ Chinese Acad Sci, Sch Engn Sci, Beijing, Peoples R China 4.Chinese Acad Sci, Inst Rock & Soil Mech, State Key Lab Geomech & Geotech Engn, Wuhan, Peoples R China |
| 推荐引用方式 GB/T 7714 | Fu, Xiaodong,Ding, Haifeng,Sheng, Qian,et al. Reproduction Method of Rockfall Geologic Hazards Based on Oblique Photography and Three-Dimensional Discontinuous Deformation Analysis[J]. FRONTIERS IN EARTH SCIENCE,2021,9:17. |
| APA | Fu, Xiaodong.,Ding, Haifeng.,Sheng, Qian.,Chen, Jian.,Chen, He.,...&Du, Wenjie.(2021).Reproduction Method of Rockfall Geologic Hazards Based on Oblique Photography and Three-Dimensional Discontinuous Deformation Analysis.FRONTIERS IN EARTH SCIENCE,9,17. |
| MLA | Fu, Xiaodong,et al."Reproduction Method of Rockfall Geologic Hazards Based on Oblique Photography and Three-Dimensional Discontinuous Deformation Analysis".FRONTIERS IN EARTH SCIENCE 9(2021):17. |
入库方式： OAI收割
来源：武汉岩土力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。