中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
首页 机构 成果 学者
  
  1. CAS IR Grid
  2. 金属研究所
  3. 中国科学院金属研究所
Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed alpha-beta Ti-6Al-4V alloy

文献类型：期刊论文

作者Zhang, Jinhu2,4; Ju, Hongtao2,3,4; Xu, Haisheng2,3,4; Yang, Liang2,4; Meng, Zhichao2,3,4; Liu, Chen1; Sun, Ping1; Qiu, Jianke2,3,4; Bai, Chunguang2,3,4; Xu, Dongsheng2,3,4
刊名JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
出版日期2021-12-20
卷号94页码:1-9
ISSN号1005-0302
关键词Heating rate Alloying element partitioning Microstructure morphology Mechanical properties
DOI10.1016/j.jmst.2021.02.061
通讯作者Zhang, Jinhu(jinhuzhang@imr.ac.cn) ; Xu, Dongsheng(dsxu@imr.ac.cn)
英文摘要The effects of heating rate on the alloy element partitioning and mechanical properties during the phase transformation of alpha ->beta in Ti-6Al-4 V alloy under solution treatment have been investigated by the experiments and phase field simulations, which reveal the evolutions of microstructure and compositions at the non-equilibrium state and well verify the experimental results. The specific results indicate that the compositions measured through electron probe micro-analysis (EPMA) under a lower heating rate are close to the equilibrium ones corresponding to the solution temperature. Heating up to the target solution temperature, as the heating rate increases, the Al content decreases and V increases in the primary alpha (alpha(p)) grain with a larger size, the volume fraction of alpha(p) increases and the composition gradient between alpha(p) and beta phases gets steeper. The interrelated relationship among the diffusion, compositions, solution temperature and free energy of the system has been discussed in detail. Moreover, increasing the heating rate (similar to 20.0 K/min) may help to improve the mechanical properties of the alloy by mainly adjusting the alpha(p)/beta(t) volume fractions, alpha(p) particle size and secondary alpha (alpha(s)) size during the process of heating up to the solution temperature. These results may shed some light on the optimization of the knowledge-based heat treatment route. (C) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals.
资助项目Na-tional Natural Science Foundation of China[51701219] ; Doctoral Scientific Research Foundation of Liaoning Province[20180540133] ; Special Project on Information Technology of the Chinese Academy of Sciences[XXH13506-304]
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
出版者JOURNAL MATER SCI TECHNOL
WOS记录号WOS:000733965000001
资助机构Na-tional Natural Science Foundation of China ; Doctoral Scientific Research Foundation of Liaoning Province ; Special Project on Information Technology of the Chinese Academy of Sciences
源URL[http://ir.imr.ac.cn/handle/321006/167249]  
专题金属研究所_中国科学院金属研究所
通讯作者Zhang, Jinhu; Xu, Dongsheng
作者单位1.Shenyang Res Inst Chem Ind Co Ltd, Safety Evaluat Ctr, Shenyang 110141, Peoples R China
2.Chinese Acad Sci, Inst Met Res, Shi Changxu Innovat Ctr Adv Mat, Shenyang 110016, Peoples R China
3.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714		 Zhang, Jinhu,Ju, Hongtao,Xu, Haisheng,et al. Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed alpha-beta Ti-6Al-4V alloy[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2021,94:1-9.
APA Zhang, Jinhu.,Ju, Hongtao.,Xu, Haisheng.,Yang, Liang.,Meng, Zhichao.,...&Yang, Rui.(2021).Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed alpha-beta Ti-6Al-4V alloy.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,94,1-9.
MLA Zhang, Jinhu,et al."Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed alpha-beta Ti-6Al-4V alloy".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 94(2021):1-9.

入库方式： OAI收割

来源：金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。