中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel

文献类型:期刊论文

作者Tu, Xingyang1,2; Shi, Xianbo1; Yan, Wei1; Li, Changsheng2; Shi, Quanqiang1; Shan, Yiyin1; Yang, Ke1
刊名MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
出版日期2022-01-13
卷号831页码:16
ISSN号0921-5093
关键词Ferrite and bainite dual-phase steel In-situ tensile test Orientation evolution Geometrically necessary dislocation Slip transfer
DOI10.1016/j.msea.2021.142230
通讯作者Shi, Xianbo(xbshi@imr.ac.cn) ; Li, Changsheng(lics@ral.neu.edu.cn)
英文摘要In-situ tensile test accompanied by electron backscatter diffraction (EBSD) analyses were performed on polygonal ferrite (PF) and bainite dual-phase steel, selected regions of interest were analyzed following plastic deformation of the steel. Deformation-induced crystal orientation evolution, localized strain concentration, slip transfer, and geometrically necessary dislocation (GND) density were tracked. Results revealed that heterogeneity deformation facilitated formation subregions with crystal orientation deviation in grain and fragmented the grain by the new low angle grain boundaries (LAGBs) or medium angle grain boundaries (MAGBs). The PF grains with ND// <111> preferred crystal orientation exhibited high orientation stability, and almost all load axes of the selected PF grains moved to the [101] pole, resulting in enhancing {111} <110> orientation component at high strain levels. With the lattice rotation during deformation, the high angle grain boundaries (HAGBs) can change to MAGBs, which was beneficial to maintain coordination deformation among grains. Localized strain concentration can be decreased by the slip transfer across the PF grain boundaries or bainite/PF phase boundaries, which reduced the risk of micro-void formation. Additionally, the variation of alpha 12 GND tensor average value (Ave. alpha 12) revealed that the ferrite was continuous plastic deformation, while the bainite occurred stage hardening. The required strain for the coordination deformation was controlled by strain hardening behavior.
资助项目National Key Research and Development Program of China[2018YFC0310300] ; State Key Laboratory of Metal Material for Marine Equipment and Application Funding[SKLMEA-K202002]
WOS研究方向Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
语种英语
出版者ELSEVIER SCIENCE SA
WOS记录号WOS:000718441600002
资助机构National Key Research and Development Program of China ; State Key Laboratory of Metal Material for Marine Equipment and Application Funding
源URL[http://ir.imr.ac.cn/handle/321006/167347]  
专题金属研究所_中国科学院金属研究所
通讯作者Shi, Xianbo; Li, Changsheng
作者单位1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China
2.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
推荐引用方式
GB/T 7714
Tu, Xingyang,Shi, Xianbo,Yan, Wei,et al. Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2022,831:16.
APA Tu, Xingyang.,Shi, Xianbo.,Yan, Wei.,Li, Changsheng.,Shi, Quanqiang.,...&Yang, Ke.(2022).Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,831,16.
MLA Tu, Xingyang,et al."Tensile deformation behavior of ferrite-bainite dual-phase pipeline steel".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 831(2022):16.

入库方式: OAI收割

来源:金属研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。