中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Thermo-fluidic characteristics and performance in a distribute heating bubble pump generator

文献类型:期刊论文

作者Yang, Honghai2; Chen, Yuping2; Wu, Yiwei2; Yang FC(杨丰畅)1; Huang, Xinyu2; Xu, Yue2; Duan, Wenli2
刊名INTERNATIONAL JOURNAL OF REFRIGERATION
出版日期2022
卷号133页码:181-190
关键词Bubble pump generator Distribute heating Multiple lift tubes Flow pattern evolution Lift performance Flow stability
ISSN号0140-7007
DOI10.1016/j.ijrefrig.2021.09.031
通讯作者Yang, Honghai(yhh@dhu.edu.cn)
英文摘要In some thermally driven two-phase natural circulation systems, bubble pumps serve as the key driving powers for the cycles. Recently a type of distribute heating bubble pump generator (BPG) is gradually receiving attention due to its compact structure and great potentials to utilize solar energy and low-grade waste heat recovery. The BPG provides a variety of promising features (e.g., passive heat transfer, enhanced reliability), which can benefit the advancing of heat transfer technology. For the primary study, we performed an experiment in a distributed heating BPG. Through utilizing multiple lift tubes and partial visualization configurations, it provides accesses to observe the flow pattern transition and monitor the flow instability, and thus to explore some of the underlying mechanisms affecting BPG performance. Results showed that heat input and immersion height were crucial parameters to enable the operation of distribute heating BPG. With low heat input or high inlet water subcooling level, the flow within the pump was unstable with intermittent flow interruptions. As the heat input increased, the fluid flow became more stable, the vapor generation increased linearly, while the lifted liquid flow rate initially increased then decreased. Correspondingly, the flow pattern at the outlet section of lift tubes gradually changed from slug flow to churn flow, and then to annular flow. The higher of the immersion was, the higher heat input was needed for the flow pattern transition. It was in the churn flow regime at the outlet of lift tubes for the BPG to lift a maximum liquid. At lower immersion level, liquid reflux in the lift tubes was obvious and affected the flow stability as well as the lifting performance. At higher immersion level, the fluid flow was more stable and faster, which lifted more liquid while generated less vapor depending on the inlet subcooling. In general, the BPG showed better performance (both the lifted liquid and vapor generation increased) at smaller inlet subcooling level or lower system pressure. This study highlights the flow pattern evolution and flow stability, which is helpful to the reliable design and effective operation of the distributed heating BPG.
分类号二类
WOS关键词FLOW ; SIMULATION ; CHILLER ; WORKING ; SYSTEM
资助项目National Key R&D Program of China[2016YFB0601404]
WOS研究方向Thermodynamics ; Engineering
语种英语
WOS记录号WOS:000729409700011
资助机构National Key R&D Program of China
其他责任者Yang, Honghai
源URL[http://dspace.imech.ac.cn/handle/311007/88269]  
专题力学研究所_非线性力学国家重点实验室
作者单位1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China
2.Donghua Univ, Coll Environm Sci & Engn, Shanghai 201620, Peoples R China;
推荐引用方式
GB/T 7714
Yang, Honghai,Chen, Yuping,Wu, Yiwei,et al. Thermo-fluidic characteristics and performance in a distribute heating bubble pump generator[J]. INTERNATIONAL JOURNAL OF REFRIGERATION,2022,133:181-190.
APA Yang, Honghai.,Chen, Yuping.,Wu, Yiwei.,杨丰畅.,Huang, Xinyu.,...&Duan, Wenli.(2022).Thermo-fluidic characteristics and performance in a distribute heating bubble pump generator.INTERNATIONAL JOURNAL OF REFRIGERATION,133,181-190.
MLA Yang, Honghai,et al."Thermo-fluidic characteristics and performance in a distribute heating bubble pump generator".INTERNATIONAL JOURNAL OF REFRIGERATION 133(2022):181-190.

入库方式: OAI收割

来源:力学研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。