Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures
文献类型:期刊论文
作者 | Zhang, Guangjie1,2; Zhang, Qinggang1,3; Yang, Junfeng1,4![]() ![]() ![]() ![]() ![]() ![]() |
刊名 | MATERIALS
![]() |
出版日期 | 2022-02-01 |
卷号 | 15 |
关键词 | ferrite-martensite steel precipitates tensile properties microstructure |
DOI | 10.3390/ma15031248 |
通讯作者 | Yang, Junfeng(jfyang@issp.ac.cn) ; Wang, Xianping(xpwang@issp.ac.cn) |
英文摘要 | Tensile properties and microstructure changes under different stress states of tempered 9Cr-F/M steel were characterized using a transmission electron microscope (TEM), electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), Vickers hardness tester, and tensile tester. This tempered steel has a typical lath martensite structure with only a few polygonal ferrites embedded, and M23C6 and MX phases nucleated on the lath boundaries or within the sub-grains. At elevated temperatures, the strength of the steel decreases. However, the elongation at 400 degrees C is lower than that at room temperature. For the necking zone, tensile deformation made the grain elongated to the direction of applied stress and thus the grain's cross-section becomes smaller. For samples with rectangular working area cross-section, the deformation in the TD direction was more severe than that in the ND direction, which made the grain elongated in the TD direction. These results can provide some guidance for composition optimization of the 9Cr-F/M steel and facilitate a better understanding of the fracture mechanism under different stress states. |
WOS关键词 | X-RAY-DIFFRACTION ; MECHANICAL-PROPERTIES ; OXIDATION BEHAVIOR ; MARTENSITIC STEEL ; SILICON ; EVOLUTION ; IRRADIATION ; ENERGY |
资助项目 | National Natural Science Foundation of China[U196720001] ; National Natural Science Foundation of China[51502300] ; National Key Research and Development Program of China[2017YFA0402800] ; fund of Science and Technology on Reactor Fuel and Materials Laboratory[6142A06200310] |
WOS研究方向 | Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering ; Physics |
语种 | 英语 |
WOS记录号 | WOS:000759887400001 |
出版者 | MDPI |
资助机构 | National Natural Science Foundation of China ; National Key Research and Development Program of China ; fund of Science and Technology on Reactor Fuel and Materials Laboratory |
源URL | [http://ir.hfcas.ac.cn:8080/handle/334002/127847] ![]() |
专题 | 中国科学院合肥物质科学研究院 |
通讯作者 | Yang, Junfeng; Wang, Xianping |
作者单位 | 1.Chinese Acad Sci, Key Lab Mat Phys, Inst Solid State Phys, Hefei Inst Phys Sci, Hefei 230031, Peoples R China 2.Univ Sci & Technol China, Grad Sch, Scinece Isl Branch, Hefei 230026, Peoples R China 3.Anhui Univ, Inst Phys Sci & Informat Technol, Hefei 230601, Peoples R China 4.Anhui Inst Innovat Ind Technol, Luan Branch, Luan 237100, Peoples R China 5.Nucl Power Inst China, Sci & Technol Reactor Fuel & Mat Lab, Chengdu 610041, Peoples R China 6.Chengdu Univ, Inst Adv Study, Interdisciplinary Mat Res Ctr, Chengdu 610106, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang, Guangjie,Zhang, Qinggang,Yang, Junfeng,et al. Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures[J]. MATERIALS,2022,15. |
APA | Zhang, Guangjie.,Zhang, Qinggang.,Yang, Junfeng.,Xie, Zhuoming.,Zhang, Linchao.,...&Wang, Xianping.(2022).Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures.MATERIALS,15. |
MLA | Zhang, Guangjie,et al."Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures".MATERIALS 15(2022). |
入库方式: OAI收割
来源:合肥物质科学研究院
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。