The Research of Φ1400mm Sic Mirror for Fabrication, Test and Alignment
文献类型：会议论文
| 作者 | Liangjie, Feng; Gangyi, Zou ; Pengfei, Cheng; Renguorui; Wei, Wang
|
| 出版日期 | 2021 |
| 会议日期 | 2021-06-14 |
| 会议地点 | Chengdu, China |
| 关键词 | SiC mirror flexure support light-weighted design surface distortion |
| 卷号 | 12070 |
| DOI | 10.1117/12.2605024 |
| 英文摘要 | A Φ1400mm silicon carbide(SiC) mirror assembly was designed according to the requirement of the mass and the optical surface distortion. The parameters of the light-weighted open-back primary mirror were optimized by finite element analysis. Six flexure bipods were designed to support the mirror edge in 12 points evenly. 12 floating anti-gravity supports were used to Minimize the optical surface distortion caused by gravity effect to obtain the real optical surface during polishing. The mirror was precisely assembled with the bipods supports and the Carbon fiber reinforcement plastic (CFRP) chamber. The optical test with interferometer showed that the surface distortion was less than 0.03λ(λ=632nm) RMS with ±5 temperature variation and 1g gravity condition, and the mass was 145kg, which coincided with the FEA results. © 2021 SPIE |
| 产权排序 | 1 |
| 会议录 | 10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes
 |
| 会议录出版者 | SPIE |
| 语种 | 英语 |
| ISSN号 | 0277786X;1996756X |
| ISBN号 | 9781510650152 |
| 源URL | [http://ir.opt.ac.cn/handle/181661/95734]  |
| 专题 | 西安光学精密机械研究所_空间光学应用研究室 |
| 作者单位 | Xi'an Institute of Optics and Precision Mechanics, CAS, China |
| 推荐引用方式 GB/T 7714 | Liangjie, Feng,Gangyi, Zou,Pengfei, Cheng,et al. The Research of Φ1400mm Sic Mirror for Fabrication, Test and Alignment[C]. 见:. Chengdu, China. 2021-06-14. |
入库方式： OAI收割
来源：西安光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。