In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy
文献类型：期刊论文
| 作者 | Qian, Weijian3; Wu, Shengchuan2,3; Wu, Zhengkai3; Ahmed, Saad2; Zhang, Wen2; Qian, Guian1 ; Withers, Philip J.2
|
| 刊名 | INTERNATIONAL JOURNAL OF FATIGUE
 |
| 出版日期 | 2022-02-01 |
| 卷号 | 155页码:13 |
| 关键词 | Additive manufacturing (AM)
Multiple defects
Synchrotron X-ray micro computed & nbsp Fatigue crack growth prediction AlSi10Mg alloys tomography ( mu CT) |
| ISSN号 | 0142-1123 |
| DOI | 10.1016/j.ijfatigue.2021.106616 |
| 通讯作者 | Wu, Shengchuan(wusc@swjtu.edu.cn) |
| 英文摘要 | Defects introduced during additive manufacturing currently control fatigue resistance and lead to a large scatter in lifetime, with pancake shaped lack of fusion (LOF) defects being particularly potent. In this study the fatigue crack propagation life of selective laser-melted (SLM) AlSi10Mg alloy is considered in cases where single cracks and multiple cracks can initiate from LOF defects under high cycle fatigue (HCF). Firstly, the aspect ratios of initially long fatigue cracks were determined for critical LOF defects obtained from X-ray CT renderings using the critical defect regularization method, and the response surface method used to obtain the stress intensity factor of the crack front quickly and continuously. Then a single crack propagation model considering the evolution of the crack aspect ratio established to predict the crack propagation life which is in good agreement within in situ X-ray CT imaging of the crack front when a single crack is dominant. The crack propagation phase was predicted to represent 35-60% of the total fatigue life representing a larger fraction at high stress amplitudes. Multiple cracks were found to initiate cracks at the larger stress amplitudes. In cases where multiple cracks arise this is non conservative and so a synergistic multiple fatigue crack growth (smFCG) model was developed based on multiple defects measured a priori by X-ray CT to depict the competitive cracking effect. Compared with the single crack model, the smFCG model predicts a shorter propagation life (by 5-10%) when multiple defects are involved since it considers all the initial defects within the crack initiation region. Given the propensity of large numbers of defects in AM material this approach may be more appropriate in many cases. |
| WOS关键词 | STRESS INTENSITY FACTORS ; EQUIVALENT THICKNESS CONCEPTION ; SURFACE CRACKS ; POROSITY DEFECTS ; ROUND BARS ; SHAPE ; LIFE ; PREDICTION ; SPECIMENS ; TOMOGRAPHY |
| 资助项目 | Joint Fund of Large-scale Scientific Facility of National Natural Science Foundation of China[U2032121] ; European Research Council(CORREL-CT)[695638] ; EPSRC[EP/R00661X/1] ; EPSRC[EP/S019367/1] ; EPSRC[EP/P025021/1] ; EPSRC[EP/P025498/1] ; EPSRC[EP/P006566/1] |
| WOS研究方向 | Engineering ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000789644600004 |
| 资助机构 | Joint Fund of Large-scale Scientific Facility of National Natural Science Foundation of China ; European Research Council(CORREL-CT) ; EPSRC |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/89066]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 通讯作者 | Wu, Shengchuan |
| 作者单位 | 1.Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China 2.Univ Manchester, Henry Royce Inst, Dept Mat, Manchester M13 9PL, England 3.Southwest Jiaotong Univ, State Key Lab Tract Power, Chengdu 610031, Peoples R China |
| 推荐引用方式 GB/T 7714 |
Qian, Weijian,Wu, Shengchuan,Wu, Zhengkai,et al. In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy [J]. INTERNATIONAL JOURNAL OF FATIGUE,2022,155:13. |
| APA |
Qian, Weijian.,Wu, Shengchuan.,Wu, Zhengkai.,Ahmed, Saad.,Zhang, Wen.,...&Withers, Philip J..(2022). In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy .INTERNATIONAL JOURNAL OF FATIGUE,155,13. |
| MLA |
Qian, Weijian,et al." In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy ".INTERNATIONAL JOURNAL OF FATIGUE 155(2022):13. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。