On the evolution of n-octane atomization characteristics using an air-assisted intermittent spray method
文献类型:期刊论文
作者 | Wu, Hao2,3; Zhang, Fujun3; Zhang, Zhenyu2,3; Wu, Kun1; Fan, Xuejun1![]() ![]() |
刊名 | FUEL PROCESSING TECHNOLOGY
![]() |
出版日期 | 2022-06-15 |
卷号 | 231页码:17 |
关键词 | Air-assisted spray Droplet size-velocity joint probability density function Sauter Mean Diameter Turbulent intensity Slip velocity |
ISSN号 | 0378-3820 |
DOI | 10.1016/j.fuproc.2022.107231 |
通讯作者 | Zhang, Zhenyu(zhenyu.zhang@bit.edu.cn) |
英文摘要 | In this study, droplet size and velocity of an intermittent air-assisted n-octane spray were measured using a Phase Doppler Particle Analyzer, focusing on the effect of operating parameters on time-resolved droplet behavior and local gas flow characteristics. An electro-magnetically actuated air-assisted injector, which features internal gas liquid premixing upstream and releasing through an annular nozzle, was used to generate intermittent sprays. The sampling time equalization method is employed to examine the time-resolved spray microscopic characteristics with various injection control parameters and spatial sampling positions. The droplet diameter range is found to be generally independent of air injection duration and sampling time while droplet velocity is correlated with these two parameters. A large air injection duration tends to accelerate droplets in the late spray period and leads to an increasing normalized gas flow velocity. Estimation of local gas flow turbulence intensity indicates a prominent radial sampling position dependence due to the rapid attenuation of the gas flow velocity away from the spray axis. A noteworthy finding for this intermittent air-assisted spray is that at 30 mm from the nozzle outlet, the zero point of droplet-gas mean slip velocity shifts toward the nozzle with sampling time. The time bin size employed to divide the sampling time has been proved to exert no influence on the statistical results of transient spray microscopic characteristics. |
WOS关键词 | TWIN-FLUID ATOMIZATION ; VISCOUS-LIQUIDS ; FUEL-INJECTION ; DROPLET SIZE ; PRESSURE ; JET ; PARAMETERS ; DYNAMICS ; FIELD ; LADEN |
资助项目 | National Natural Science Foundation of China[51806013] ; Foundation research funds of the Ministry of Industry and Information Technology[WDZC-2019-JGKK-02] ; Foundation research funds of the Ministry of Industry and Information Technology[JCKY2019602D018] ; Beijing Institute of Technology Research Fund Program for Young Scholars[2020CX04047] |
WOS研究方向 | Chemistry ; Energy & Fuels ; Engineering |
语种 | 英语 |
WOS记录号 | WOS:000791148500006 |
资助机构 | National Natural Science Foundation of China ; Foundation research funds of the Ministry of Industry and Information Technology ; Beijing Institute of Technology Research Fund Program for Young Scholars |
源URL | [http://dspace.imech.ac.cn/handle/311007/89081] ![]() |
专题 | 力学研究所_高温气体动力学国家重点实验室 |
通讯作者 | Zhang, Zhenyu |
作者单位 | 1.Chinese Acad Sci, Inst Mech, State Key Lab High Temp Gas Dynam, Beijing 100190, Peoples R China 2.Yangtze Delta Reg Acad Beijing Inst Technol, Jiaxing 314011, Zhejiang, Peoples R China 3.Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China |
推荐引用方式 GB/T 7714 | Wu, Hao,Zhang, Fujun,Zhang, Zhenyu,et al. On the evolution of n-octane atomization characteristics using an air-assisted intermittent spray method[J]. FUEL PROCESSING TECHNOLOGY,2022,231:17. |
APA | Wu, Hao,Zhang, Fujun,Zhang, Zhenyu,Wu, Kun,Fan, Xuejun,&范学军.(2022).On the evolution of n-octane atomization characteristics using an air-assisted intermittent spray method.FUEL PROCESSING TECHNOLOGY,231,17. |
MLA | Wu, Hao,et al."On the evolution of n-octane atomization characteristics using an air-assisted intermittent spray method".FUEL PROCESSING TECHNOLOGY 231(2022):17. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。