Defect Engineering can Enhance the Electrochemical Performance of WS2 for Thermal Batteries
文献类型：期刊论文
| 作者 | Chen,Fuhua1,2,3; Guo,Hao4; Zhao,Lili2,3; Guo,Xin1,2,3; Li,Shunchang1,2,3; Chu,Ying2,3; Wang,Xueying2,3; Zhu,Yongping2,3 |
| 刊名 | Journal of The Electrochemical Society
 |
| 出版日期 | 2021-10-01 |
| 卷号 | 168期号:10 |
| 关键词 | Thermal battery thermal stability Cathode material Sulfur vacancy WS2 |
| ISSN号 | 0013-4651 |
| DOI | 10.1149/1945-7111/ac2ebe |
| 英文摘要 | As a cathode material for thermal batteries, WS2 has high thermal decomposition temperature and large specific capacity, but it is an intermittent semiconductor, with relatively low conductivity. This low conductivity can prolong the activation time and reduce the discharge specific capacity of thermal batteries. Here, we prepared WS2 with sulfur vacancies through a simple high-temperature annealing method and used electron paramagnetic resonance spectroscopy and X-ray photoelectron spectroscopy to detect the presence of sulfur vacancies. The result shows that sulfur vacancies were successfully introduced in WS2, and the existence of sulfur vacancies can effectively improve the discharge performance of thermal batteries. While maintaining the nanostructure, the thermal decomposition temperature still exceeds 1000 °C, which is far beyond the traditional FeS2 (550 °C) and CoS2 (650 °C) cathodes. The Li-B/LiF-LiBr-LiCl/WS2 with sulfur vacancies (treated at 500 °C) couple has higher discharge specific capacity (when the cut-off voltage is 0.5 V, it is 380.58 mAh g?1, which is 14.85% higher than the original WS2) and lower total polarization (about 21% lower than original WS2). This work provides a beginning for further study of sulfur vacancies defect materials as the cathode of thermal batteries. |
| 语种 | 英语 |
| WOS记录号 | IOP:0013-4651-168-10-AC2EBE |
| 出版者 | IOP Publishing |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/49952]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Chen,Fuhua; Zhao,Lili; Zhu,Yongping |
| 作者单位 | 1.University of Chinese Academy of Sciences, Beijing 100039, People’s Republic of China 2.State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, People’s Republic of China 3.Key Laboratory of Science and Technology on Particle Materials, Chinese Academy of Sciences, Beijing 100190, People’s Republic of China 4.State Key Laboratory of Advanced Chemical Power Sources, Guizhou Meiling Power Sources Co. Ltd. Zunyi, 563003 Guizhou, People’s Republic of China |
| 推荐引用方式 GB/T 7714 | Chen,Fuhua,Guo,Hao,Zhao,Lili,et al. Defect Engineering can Enhance the Electrochemical Performance of WS2 for Thermal Batteries[J]. Journal of The Electrochemical Society,2021,168(10). |
| APA | Chen,Fuhua.,Guo,Hao.,Zhao,Lili.,Guo,Xin.,Li,Shunchang.,...&Zhu,Yongping.(2021).Defect Engineering can Enhance the Electrochemical Performance of WS2 for Thermal Batteries.Journal of The Electrochemical Society,168(10). |
| MLA | Chen,Fuhua,et al."Defect Engineering can Enhance the Electrochemical Performance of WS2 for Thermal Batteries".Journal of The Electrochemical Society 168.10(2021). |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。