Fabrication of C/C-SiC-ZrB2 Ultra-High Temperature Composites through Liquid-Solid Chemical Reaction
文献类型：期刊论文
| 作者 | Sun, Qian1,2,3; Zhang, Huifeng1,2,4; Huang, Chuanbing1,2,4; Zhang, Weigang1,2,3,4 |
| 刊名 | CRYSTALS
 |
| 出版日期 | 2021-11-01 |
| 卷号 | 11期号:11页码:11 |
| 关键词 | reactive melt infiltration
C/C-SiC-ZrB2 composites composition microstructural evolution formation mechanism |
| DOI | 10.3390/cryst11111352 |
| 英文摘要 | In this paper, we aimed to improve the oxidation and ablation resistance of carbon fiber-reinforced carbon (CFC) composites at temperatures above 2000 & DEG;C. C/C-SiC-ZrB2 ultra-high temperature ceramic composites were fabricated through a complicated liquid-solid reactive process combining slurry infiltration (SI) and reactive melt infiltration (RMI). A liquid Si-Zr10 eutectic alloy was introduced, at 1600 & DEG;C, into porous CFC composites containing two kinds of boride particles (B4C and ZrB2, respectively) to form a SiC-ZrB2 matrix. The effects and mechanism of the introduced B4C and ZrB2 particles on the formation reaction and microstructure of the final C/C-SiC-ZrB2 composites were investigated in detail. It was found that the composite obtained from a C/C-B4C preform displayed a porous and loose structure, and the formed SiC-ZrB2 matrix distributed heterogeneously in the composite due to the asynchronous generation of the SiC and ZrB2 ceramics. However, the C/C-SiC-ZrB2 composite, prepared from a C/C-ZrB2 preform, showed a very dense matrix between the fiber bundles, and elongated plate-like ZrB2 ceramics appeared in the matrix, which were derived from the dissolution-diffusion-precipitation mechanism of the ZrB2 clusters. The latter composite exhibited a relatively higher ZrB2 content (9.51%) and bulk density (2.82 g/cm(3)), along with lower open porosity (3.43%), which endowed this novel composite with good mechanical properties, including pseudo-plastic fracture behavior. |
| WOS关键词 | MECHANICAL-PROPERTIES ; SIC COMPOSITES ; ZRC COMPOSITES ; MELT ; MICROSTRUCTURE ; INFILTRATION ; ZIRCONIUM ; RESISTANCE ; OXIDATION ; ABLATION |
| 资助项目 | Innovation Academy for Green Manufacture[IAGM2020C22] ; Key Laboratory of Multi-phase Complex Systems[MPCS-2021-A-02] ; Chinese Academy of Sciences |
| WOS研究方向 | Crystallography ; Materials Science |
| 语种 | 英语 |
| WOS记录号 | WOS:000728022300001 |
| 出版者 | MDPI |
| 资助机构 | Innovation Academy for Green Manufacture ; Key Laboratory of Multi-phase Complex Systems ; Chinese Academy of Sciences |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/51343]  |
| 专题 | 中国科学院过程工程研究所 |
| 通讯作者 | Zhang, Weigang |
| 作者单位 | 1.Chinese Acad Sci, Key Lab Sci & Technol Particle Mat, Inst Proc Engn, Beijing 100190, Peoples R China 2.Chinese Acad Sci, State Key Lab Multiphase Complex Syst, Inst Proc Engn, Beijing 100190, Peoples R China 3.Univ Chinese Acad Sci, Sch Chem Engn, Beijing 100049, Peoples R China 4.Chinese Acad Sci, Ganjiang Innovat Acad, Ganzhou 341000, Peoples R China |
| 推荐引用方式 GB/T 7714 | Sun, Qian,Zhang, Huifeng,Huang, Chuanbing,et al. Fabrication of C/C-SiC-ZrB2 Ultra-High Temperature Composites through Liquid-Solid Chemical Reaction[J]. CRYSTALS,2021,11(11):11. |
| APA | Sun, Qian,Zhang, Huifeng,Huang, Chuanbing,&Zhang, Weigang.(2021).Fabrication of C/C-SiC-ZrB2 Ultra-High Temperature Composites through Liquid-Solid Chemical Reaction.CRYSTALS,11(11),11. |
| MLA | Sun, Qian,et al."Fabrication of C/C-SiC-ZrB2 Ultra-High Temperature Composites through Liquid-Solid Chemical Reaction".CRYSTALS 11.11(2021):11. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。