Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel
文献类型：期刊论文
| 作者 | Cui, Luqing2; Deng, Dunyong2; Jiang, Fuqing1; Peng, Ru Lin2; Xin, Tongzheng3; Mousavian, Reza Taherzadeh4; Yang, Zhiqing1,5; Moverare, Johan2 |
| 刊名 | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| 出版日期 | 2022-06-01 |
| 卷号 | 111页码:268-278 |
| 关键词 | Additive manufacturing 316L stainless steel Fatigue behavior Cellular structure Nanotwins |
| ISSN号 | 1005-0302 |
| DOI | 10.1016/j.jmst.2021.10.006 |
| 通讯作者 | Yang, Zhiqing(yangzq@imr.ac.cn) ; Moverare, Johan(johan.moverare@liu.se) |
| 英文摘要 | We have investigated the low cycle fatigue (LCF) properties and the extent of strengthening in a dense additively manufactured stainless steel containing different volume fractions of cell structures but having all other microstructure characteristics the same. The samples were produced by laser powder bed fusion (L-PBF), and the concentration of cell structures was varied systematically by varying the annealing treatments. Load-controlled fatigue experiments performed on samples with a high fraction of cell structures reveal an up to 23 times increase in fatigue life compared to an essentially cell-free sample of the same grain configuration. Multiscale electron microscopy characterizations reveal that the cell structures serve as the soft barriers to the dislocation propagation and the partials are the main carrier for cyclic loading. The cell structures, stabilized by the segregated atoms and misorientation between the adjacent cells, are retained during the entire plastic deformation, hence, can continuously interact with dislocations, promote the formation of nanotwins, and provide massive 3D network obstacles to the dislocation motion. The compositional micro-segregation caused by the cellular solidification features serves as another non negligible strengthening mechanism to dislocation motion. Specifically, the cell structures with a high density of dislocation debris also appear to act as dislocation nucleation sites, very much like coherent twin boundaries. This work indicates the potential of additive manufacturing to design energy absorbent alloys with high performance by tailoring the microstructure through the printing process. (c) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ) |
| 资助项目 | Swedish Governmental Agency for Innovation Systems (Vinnova)[2016-05175] ; Science Foundation Ireland (SFI)[16/RC/3872] ; Center for Additive Manufacturing-metal (CAM2) ; Ji Hua Laboratory[X210141TL210] |
| WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| WOS记录号 | WOS:000788811500007 |
| 出版者 | JOURNAL MATER SCI TECHNOL |
| 资助机构 | Swedish Governmental Agency for Innovation Systems (Vinnova) ; Science Foundation Ireland (SFI) ; Center for Additive Manufacturing-metal (CAM2) ; Ji Hua Laboratory |
| 源URL | [http://ir.imr.ac.cn/handle/321006/172569]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Yang, Zhiqing; Moverare, Johan |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Linkoping Univ, Dept Management & Engn, Div Engn Mat, SE-58183 Linkoping, Sweden 3.Univ New South Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia 4.Dublin City Univ, Adv Mfg Res Ctr, I Form, Dublin 9, Ireland 5.Ji Hua Lab, Foshan 528200, Peoples R China |
| 推荐引用方式 GB/T 7714 | Cui, Luqing,Deng, Dunyong,Jiang, Fuqing,et al. Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2022,111:268-278. |
| APA | Cui, Luqing.,Deng, Dunyong.,Jiang, Fuqing.,Peng, Ru Lin.,Xin, Tongzheng.,...&Moverare, Johan.(2022).Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,111,268-278. |
| MLA | Cui, Luqing,et al."Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 111(2022):268-278. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。