Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy
文献类型：期刊论文
| 作者 | Li, Xiaonan1,2; Liu, Zhenyu1; Dai, Zhixin1,2; Feng, Hui1; Xiao, Bolyu1; Ni, Dingrui1; Wang, Quanzhao1; Wang, Dong1; Ma, Zongyi1 |
| 刊名 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| 出版日期 | 2022-04-28 |
| 页码 | 12 |
| ISSN号 | 1006-7191 |
| 关键词 | Wear mechanism Carbon nanotube Aluminum matrix composites Powder metallurgy |
| DOI | 10.1007/s40195-022-01405-7 |
| 通讯作者 | Liu, Zhenyu(zyliu@imr.ac.cn) |
| 英文摘要 | The uniformly dispersed carbon nanotubes (CNTs) reinforced 6061Al composites (CNT/6061Al) with different CNT concentrations were fabricated by powder metallurgy technology. It was found that the friction coefficient as well as wear rate decreased first and then increased as the CNT concentration increasing under 15 N as well as 30 N, and the minimum wear rate was achieved at the CNT concentration of 2 wt%. Adhesive wear and abrasive wear were the dominated wear mechanisms for the 1-2 wt% CNT/6061Al composites under 15 N and 30 N, while the delamination occurred on the wear surface at 3 wt% CNT. As the applied load increased to 60 N, the wear rate of composites increased dramatically. The wear mechanism transformed from abrasive wear to severe delamination wear, accompanied by the generation of wear debris with sharp edge due to the weaker anti-shearing strain capacity of CNT/6061Al composites. |
| 资助项目 | Key Research Program of Frontier Sciences, CAS[QYZDJ-SSW-JSC015] ; National Natural Science Foundation of China[51931009] ; National Natural Science Foundation of China[51871214] ; National Natural Science Foundation of China[51871215] ; Liao Ning Revitalization Talents Program[XLYC1902058] ; Youth Innovation Promotion Association CAS[2020197] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| 语种 | 英语 |
| 出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
| WOS记录号 | WOS:000788463100001 |
| 资助机构 | Key Research Program of Frontier Sciences, CAS ; National Natural Science Foundation of China ; Liao Ning Revitalization Talents Program ; Youth Innovation Promotion Association CAS |
| 源URL | [http://ir.imr.ac.cn/handle/321006/172686]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 通讯作者 | Liu, Zhenyu |
| 作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Li, Xiaonan,Liu, Zhenyu,Dai, Zhixin,et al. Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2022:12. |
| APA | Li, Xiaonan.,Liu, Zhenyu.,Dai, Zhixin.,Feng, Hui.,Xiao, Bolyu.,...&Ma, Zongyi.(2022).Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy.ACTA METALLURGICA SINICA-ENGLISH LETTERS,12. |
| MLA | Li, Xiaonan,et al."Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022):12. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。